Packard Bell EasyNote LJ75 & i7-640M

[Ruslan_12345]

Hello everyone!

I want to replace the i5-430m processor with an i7-640m (the new processor works, I checked it on another laptop).

After replacing it with a new processor, my laptop stopped turning on. After installing the old processor, the laptop turns on again.

On other forums, they said that it is very likely that you need to update the bios (supposedly, the current version is not compatible with the i7).

Unfortunately, I could not find a suitable version in the public domain.

I would be very grateful if you share a link and instructions for the updated version of bios!

Packard Bell EasyNote LJ75
INFO (AIDA64):
- type bios: Insyde UEFI
- bios version: V1.05
- date: 05/01/2010
- size: 1536 KB
- bios version system: 5.240
- smbios version: 2.6
- windows 10, 64bit

[DeathBringer]

Update BIOS to 1.08

[Ruslan_12345]

Update BIOS to  1.08

Hello!

Thank you, I was able to download the archive. I followed the instructions from the archive - I ran DOS/BIOS.bat, but an error appeared:
```
Unsupported 16-bit application

The program or component SPROM.EXE failed to start due to incompatibility with the 64-bit version of Windows
```

Do you happen to know how to fix the problem? I will be very grateful

[DeathBringer]

Read readme.txt

Code:

[SOP]
1. DOS flash: Please execute "BIOS.bat" batch file to update bios under pure Dos mode.
2. Windows flash: Please click "Winflash_NAYF0108.exe" to update bios.

Windows command line is not "pure Dos mode".