Xeon Support for GA-X58-USB3

[DeathBringer]

Try this algorithm:
1) disconnect power cord
2) disconnect all HDDs and optical drives
3) remove all DIMMs and CMOS Battery
4) install new CPU
5) wait 10 mins
6) press and hold power button for 30 sec.
7) install CMOS Battery and one DIMM only in first slot.
8) connect power cord and try to power on.

[Axtec]

The error seen in the photo does not give the current image

[Axtec]

When I checked on the intel page, the microcode of the Xeon x5670 processor is 0x1E-0x1F, my bios version displays microcode 0x1D[attachment=26053][attachment=26054]

[DeathBringer]

The latest microcode is not required to boot.
I think your motherboard has hardware problems.

[Axtec]

But it works without any problems with the i7 950 processor.

[Axtec]

The latest microcode is not required to boot.
I think your motherboard has hardware problems.

Is it possible for you to mod it with the latest microcode for me?

[DeathBringer]

I don't make senseless mods.

[Axtec]

I don't make senseless mods.

I understand I will have to take care of myself. Thank you for your help and your time.