Posts: 6
Threads: 0
Joined: Nov 2010
Reputation:
0
New Bios flashed successfully, with two new 'options' available in Bios setup:
Frequency/Voltage Control
VDIMM Voltage Select
Vcore Voltage Select
However, looking at the Bios file in Modbin, there weould seem to be a few more 'overclocking' type options available (ie they can be seen in the Setup Screen Structure Tree, as they can be seen, I assume they can be enabled ?):
K8<->NB HT Speed
NB-->SB HT Speed
NB<--SB HT Speed
K8<->NB HT Width
NB<->SB HT Width
And under Dram Configuration:
Timing Mode
Memclock index value essential for setting up a memory speed divider when raising the HT frequency
CAS# Latency
Min RAS# active time
RAS# to CAS# delay
Row precharge time
Bottom of 32-bit [31:24] IO
S/W memory hole remapping
H/W memory hole remapping
MTRR mapping mode
So, is there a possibility that these can be enabled, and do you think they'll work ?
Thanks for your help so far...