Sony VGN-SZ*0, *1, *2, *3 With Dell 2.1 SLIC/SLP

[yoroi]

Dear Experts,

Requesting SLIC 2.1 patch for Sony VGN-SZ*0 - *3.

Original BIOS(Self-extracting)

Every SLIC 2.1 is fine.
Thanks in advance.

[Busykid508]

Dear Experts,

Requesting SLIC 2.1 patch for Sony VGN-SZ*0 - *3.

Original BIOS(Self-extracting)

Every SLIC 2.1 is fine.
Thanks in advance.

I want to caution to please make a Phoenix Crisis Recovery DISK from the CRISDISK folder BEFORE you flash your bios. And flash your bios in DOS if possible.

-Manufacturer: SONY
-Motherboard Model: VGN-SZ*0, *1, *2, *3
-Bios revision: 301041232
-Bios Type: Phoenix BIOS
-Bios Download Link: http://dlv.update.sony.net/pub/vaio/down...232-UN.exe
-SOURCE of BIOS DOWNLOAD LINK: http://h10025.www1.hp.com/ewfrf/wc/softw...ob-67384-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3425144
-WInflash Bios Update Tools Included - I strongly recommend to Flash your bios in DOS using an Approved SONY DOS Flash Utility for your bios and motherboard on a BOOTABLE USB FLASH DRIVE -
-SLIC: DELL_QA09.BIN 2.1
-SLP: DELL
-DELL Certificate Included
-Tool: Phoenix Mod Tool v0.017
-Method: SSV2, Removed All Instances of Former SLIC 2.0
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


SONY_VGN-SZ_x0_x1_x2_x3-SONY-01041232-DELL_SLIC21_DELL_SLP
http://www.box.net/shared/827sldhuii

[yoroi]

Thank you.

I tried your mod but couldn't flash my BIOS.

Phlash16 showed "Platform Signature not found in the Interface." error and
Winphlash says "BIOS image verification failed. Error code: -149".
Strangely, same messages also appears in case of the original BIOS file R0112N0.WPH.
Is is confirmed in the manufacturer's site that the original is suitable for my laptop.

Are there some solution to force flashing?

Would you please give me an advice again?

[Busykid508]

Thank you.

I tried your mod but couldn't flash my BIOS.

Phlash16 showed "Platform Signature not found in the Interface." error and
Winphlash says "BIOS image verification failed. Error code: -149".
Strangely, same messages also appears in case of the original BIOS file R0112N0.WPH.
Is is confirmed in the manufacturer's site that the original is suitable for my laptop.

Are there some solution to force flashing?

Would you please give me an advice again?

Rename R0112N0_SLIC.WPH to R0112N0.WPH before flashing....I redid the modification of your bios. Download the new mod from link below.

SONY_VGN-SZ_x0_x1_x2_x3-SONY-01041232-DELL_SLIC21_DELL_SLP
http://www.box.net/shared/827sldhuii

[quiqsilver]

I guess Sony[Sony-VAIO]2.1.BIN = 98A7DCAE | 2.1 CERT wasn't available when you chose Dell, or is there another reason?

[Busykid508]

I guess Sony[Sony-VAIO]2.1.BIN = 98A7DCAE | 2.1 CERT wasn't available when you chose Dell, or is there another reason?

Sony was not available at the time that I modified your bios.

[quiqsilver]

I guess Sony[Sony-VAIO]2.1.BIN = 98A7DCAE | 2.1 CERT wasn't available when you chose Dell, or is there another reason?

Sony was not available at the time that I modified your bios.

I figured as much. Thanks for the mod. I wish the Phoenix Mod Tool wasn't closed beta; I'd prefer to use a Sony SLIC from the start in case WAT decides to check system manufacturer.

[kot_as_kot]

Requesting SLIC 2.1 patch for Sony VGN-SZ*0 - *3.

see the file under link for original sony vaio SZ 1-4 bios update. It updates bios to the recent state with SONY SLIC v2.1 W7U. You get updated from R0092N0 to R0112N0. This bios version can be modded to enable VT and AHCI.

http://www.box.net/shared/m3evn01555