Login

brylok1981 · 10-29-2010, 04:14 PM

hi
what can be done with this bios?

http://www.gigabyte.com/products/product...=3270#bios

**presola** · 10-29-2010, 04:26 PM

Some miscellaneous options were unlocked:

http://dl.dropbox.com/u/3338100/Bios%20m...locked.rar

As usual, flash at your own risk!

brylok1981 · 11-01-2010, 10:50 AM

(10-29-2010, 04:26 PM)presola Wrote: Some miscellaneous options were unlocked:

http://dl.dropbox.com/u/3338100/Bios%20m...locked.rar

As usual, flash at your own risk!

unlocked bios incorrectly recognize my ddrII800 dual channel 128bit
as ddrII400 dual channel 64bit

**presola** · 11-01-2010, 12:47 PM

Are you sure you haven't set the memory controller to Unganged mode?

brylok1981 · 11-02-2010, 03:42 AM

(11-01-2010, 12:47 PM)presola Wrote: Are you sure you haven't set the memory controller to Unganged mode?

i haven't found this option in my unlocked or original bios

cayennemist · 12-20-2010, 11:18 AM

First The "unlocking" is that just the same as showing (Ctrl-F1)
or is it unlocking safe mode allowing for overclocking?

second will this work for (rev 2.3) or does it replace it?

**presola** · 12-20-2010, 12:42 PM

Unlocking means making hidden BIOS features visible (and respectively usable). Rev2.3 uses a different BIOS, so don't try to crossflash it.

cayennemist · 12-20-2010, 02:29 PM

(12-20-2010, 12:42 PM)presola Wrote: Unlocking means making hidden BIOS features visible (and respectively usable). Rev2.3 uses a different BIOS, so don't try to crossflash it.

thanks,
So as far as the safe-mode preventing Overclocking, that may be an option in a hidden/locked menu? or is there no way to tell unless I'm actually in it? Undecided

Sorry for the spam its just I'm a little new to Bios Modding.

**presola** · 12-20-2010, 03:21 PM

What is this safe mode you speak of? Both revisions of this board have overclocking capabilities.

cayennemist · 12-20-2010, 04:18 PM

(12-20-2010, 03:21 PM)presola Wrote: What is this safe mode you speak of? Both revisions of this board have overclocking capabilities.

After setting up Even a minimal OC, then F10-ing. It stops at the Boot screen and prompts (in broken English):

"Warning! Now System is in safe mode. Please re-setting CPU Frequency in the CMOS setup"

From looking around I see its a common problem.
http://www.tigerdirect.com/applications/...No=5769562&CatId=2320

I didnt even know one could mod Bios, till i google searched it.

Login
Username:
Password:	Lost Password?
	Remember me