Welcome
|
You have to register before you can post on our site.
|
|
HP Disabled Whitelist Mega Thread!
|
Posts: 298
Threads: 0
Joined: Jul 2009
Reputation:
35
(05-14-2011, 05:01 PM)madlac Wrote: Hi, I need help with adding a new WiFi n card to my HP DV2602CA laptop. Tried to do it myself, but after everything seems to go OK and created my new bios, just bricks my laptop (did it twice already), luckily I have a USB-Floppy drive. .
Tried to flash both ways ( Windows and DOS, makes no difference).
-Manufacturer: HP COMPAQ
-Model: HP DV2500 series with AMD Processors (DV2602CA)
-Bios revision: F.28
-Released: 2011-03-11
-Bios Type: Phoenix
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52272.exe
-BIOS file: 30D6F28.wph
Existing card: Broadcom PCI\VEN_14E4&DEV_4311&SUBSYS_1374103C&REV_02
New card: Realtek PCI\VEN_10EC&DEV_8192&SUBSYS_815110EC&REV_01
Whitelist is in MOD_5100.ROM, line 000084C0.
Thanks a lot. -Manufacturer: HP COMPAQ
-Model: HP DV2xxx series with AMD Processors
-Bios revision: F.28
-Released: 2011-03-11
-Bios Type: Phoenix
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52272.exe
-SLIC: HPQOEMSLIC-MPC-HPQ.BIN 2.1
-BIOS file: 30D6F28.wph
-Tool: Phoenix Mod Tool v1.80
-Method: Dynamic
-Modifier: TTAV134
mods:
SLIC 2.1
Whitelist protection removed
HP DV2xxx_AMD_sp52272_30D6F28_SLIC21_SLP_No_whitelist.zip
Posts: 2
Threads: 0
Joined: May 2011
Reputation:
0
05-15-2011, 12:35 PM
Confirmed working on my DV2602CA, thank you so much.
(05-15-2011, 11:36 AM)TTAV134 Wrote: (05-14-2011, 05:01 PM)madlac Wrote: Hi, I need help with adding a new WiFi n card to my HP DV2602CA laptop. Tried to do it myself, but after everything seems to go OK and created my new bios, just bricks my laptop (did it twice already), luckily I have a USB-Floppy drive. .
Tried to flash both ways ( Windows and DOS, makes no difference).
-Manufacturer: HP COMPAQ
-Model: HP DV2500 series with AMD Processors (DV2602CA)
-Bios revision: F.28
-Released: 2011-03-11
-Bios Type: Phoenix
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52272.exe
-BIOS file: 30D6F28.wph
Existing card: Broadcom PCI\VEN_14E4&DEV_4311&SUBSYS_1374103C&REV_02
New card: Realtek PCI\VEN_10EC&DEV_8192&SUBSYS_815110EC&REV_01
Whitelist is in MOD_5100.ROM, line 000084C0.
Thanks a lot. -Manufacturer: HP COMPAQ
-Model: HP DV2xxx series with AMD Processors
-Bios revision: F.28
-Released: 2011-03-11
-Bios Type: Phoenix
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52272.exe
-SLIC: HPQOEMSLIC-MPC-HPQ.BIN 2.1
-BIOS file: 30D6F28.wph
-Tool: Phoenix Mod Tool v1.80
-Method: Dynamic
-Modifier: TTAV134
mods:
SLIC 2.1
Whitelist protection removed
HP DV2xxx_AMD_sp52272_30D6F28_SLIC21_SLP_No_whitelist.zip
Posts: 4
Threads: 1
Joined: May 2011
Reputation:
0
05-15-2011, 04:08 PM
(This post was last modified: 05-15-2011, 04:28 PM by jagg.)
(05-15-2011, 01:55 AM)TTAV134 Wrote: -Manufacturer: HP
-Model: HP Pavilion dv5-1000 series Entertainment Notebook PC (Intel Processors)
-Bios Revision: F.21 A
-Bios Release: 2009-09-04
-Bios link: ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45138.exe
-Bios Type: Insyde
-SLIC: HP 2.1
-Bios files: 3602F21.fd, 3603F21.fd
-Tools: Phoenix Mod Tool v1.79
-Modifier: TTAV134
-Please provide feedback
WLAN whitelist check "removed" + SLIC 2.1 + no_EIST
HP Pavilion dv5-1000_sp45138_INTEL_SLIC21_no_WL_no_EIST.zip
http://www.sendspace.com/file/samemw
Flash with InsydeFlash
Thank you very much, TTAV134, for you quick reply and for modifying the bios. I was very nicely surprised. I have installed the modified version and it seems that everything is working ok.
I succeeded to modify the bios so that it recognize an atheros wifi card, but I could not eliminate the white list entirely, because the 55 8b ec hexadecimal value, that hspumanti mentions on this site http://www.bios-mods.com/forum/Thread-Ge...nsyde-BIOS, was not in the block between 3100300034002d0055 and 4d 5a
P.D.1. After having tried more wifi cards, I want to set out the results, in case it may be of any use for the others members.
1. Broadcom wifi Card (installed by the manufacturer) wifi ON= blue wifi led//wifi OFF=orange wifi led
2. IntelPro 3945 wifi card wifi ON= unstable wifi led( blue/orange) // wifi OFF= orange wifi led
3. Atheros 5007EG card wifi led always orange.
P.D. 2. I don’t want to take unfair advantage of you, but if I don’t ask too much, I would like to know if you can eliminate the white list for a HP Pavilion dv6880, bios type Phoenix F.58 ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39862.exe.
Regards
Posts: 4
Threads: 1
Joined: Mar 2011
Reputation:
0
(05-15-2011, 03:51 AM)TTAV134 Wrote: (05-14-2011, 07:44 PM)c0rrupts3ct0r Wrote: flashed the mod, still get the same 104 error. now also the BIOS tells me that i do not have a wlan device installed before the 104 error. did i do something wrong? one more thing, the card i installed is a DELL Wireless 1501 Broadcomm based card...
@ c0rrupts3ct0r
The protection scheme of this bios is different, much more complicated. i've never seen before, thought by patching the place where the card is detected will be enough. I have now to figure out in wich module is the second step of protection.
Can you give the EXACT error message concerning the missing card, that may help me to find the module.
regards
Edit: new patched version: http://www.sendspace.com/file/u2curl
let me know works, thanks... no error messages now
Posts: 4
Threads: 1
Joined: May 2011
Reputation:
0
(05-16-2011, 12:13 AM)TTAV134 Wrote: -Manufacturer: HP Compaq
-Model: Pavilion DV6000 DV9000, Compaq Presario V6000 (INTEL Processors)
-Bios Revision: F.5A
-Bios release: 5 Apr 2010
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48024.exe
-Bios Type: Phoenix
-Tools: Phoenix Mod Tool v1.72
-Method: Dynamic - manual for SLIC mod
-Bios file: 30CCF5A_NWL_SLP_SLIC.WPH
-Modifier: TTAV134
-Please provide feedback
WLAN whitelist check "removed" + SLIC 2.1 forced to ON
HP DV6000_DV9000_Compaq_V6000_INTEL_30CCF5A_sp48024_SLP_SLI21_no_whitelist.zip
Thank you once more for your work. I installed the archive modified by you and everything is working correctly. I didn’t know there was a F5A version for the dv 6000 series, as on the downloads page for dv 6880 it appears only the F.58A version.
P.D. I am trying to use PhoenixTool v.1.25 and v.1.84 in order to open a *.FD archive, but in a few seconds the following error appears: ERROR 5 The application can not start because your configuration is wrog. Reinstalling the aplication may solve the problem. However, if I try to open a *.WPH archive, the above mentioned error doesn’t appear anymore. Do you have any ideea what the error is due to?
Regards
Posts: 298
Threads: 0
Joined: Jul 2009
Reputation:
35
i never had such error message, you can make a request to Andy with the faulty FD file.
Posts: 5
Threads: 0
Joined: May 2011
Reputation:
0
05-22-2011, 01:33 PM
(This post was last modified: 05-22-2011, 01:35 PM by tullyking.)
hello TTAV134, the download link in Sendspace is dead, can you please reupload, thanks.
HPDV6000_DV9000_Compaq_V6000_INTEL_30CCF5A_sp48024_SLP_SLI21_no_whitelist.zip
hello TTAV134, the download link in Sendspace is dead, can you please reupload, thanks.
Posts: 298
Threads: 0
Joined: Jul 2009
Reputation:
35
Posts: 5
Threads: 0
Joined: May 2011
Reputation:
0
thanks for the quick reply TTAV134, i can download now, but when i try to click on the advance tap on winflash, it give me can not load driver error message, any ideas?
|
Users browsing this thread: 12 Guest(s)
|