[solved] enabled AHCI on Asus P5K

[Frytz]

Sorry! I didn't see this already opened post...Modded bios woking like a charm on my P5K! Thank you!!!

[7alvoo]

working perfect, thenks for sharing!

[ctantra]

Thanks. It's working..., but I still can't install Intel Matrix / Intel Rapid Storage, just Standard AHCI. Any idea?

[Antinomy]

That is normal - Intel Matrix Storage doesn't support ICH9 (only ICH9R and ICH9DO).
Refer to support page: http://www.intel.com/support/chipsets/im...020644.htm

This has to be a software limitation, not hardware. So a software cracker could make it work. But it's not about the BIOS.

[ctantra]

That is normal - Intel Matrix Storage doesn't support ICH9 (only ICH9R and ICH9DO).
Refer to support page: http://www.intel.com/support/chipsets/im...020644.htm

This has to be a software limitation, not hardware. So a software cracker could make it work. But it's not about the BIOS.

Thanks for your info Antinomy...
BTW, do you know where can I find cracked Intel Rapid Storage suppported ICH9?

[Antinomy]

Nope, I'm not familiar with software guys

[cooper2k4]

That is normal - Intel Matrix Storage doesn't support ICH9 (only ICH9R and ICH9DO).
Refer to support page: http://www.intel.com/support/chipsets/im...020644.htm

This has to be a software limitation, not hardware. So a software cracker could make it work. But it's not about the BIOS.

Thanks for your info Antinomy...
BTW, do you know where can I find cracked Intel Rapid Storage suppported ICH9?

You can get modified Intel storage drivers from this German forum. Only .INF files have been updated to support the ICH8/9/10 chipsets. No binary changes. But driver's signature is broken because of that.

http://www.win-lite.de/wbb/board195-wind...thbridges/

Regards
Cooper

[pacomoreno28]

That one wasn't too easy!

I've finally had to face a new structure that I've seen before but didn't need to mod. Now I had to.


Check and enjoy.

for now the install, and change to ahci mode, I blocked, I start, or even let me occion entering bios, I have to remove battery and re-adjustments. How I can make it work and to install macos x leopard from the original dvd?

[camiloml]

Are you sure you used correct bios version?

P5k is not same as p5k/se or p5k/epu and crossflashing can give you that kind of probs.

[pacomoreno28]

Are you sure you used correct bios version?

P5k is not same as p5k/se or p5k/epu and crossflashing can give you that kind of probs.

yes, I install correctly, but set in Achi, I started asking me if you boot with efi empire however, I insert the osx dvd and I v.10.6.3 Leopard hangs at the start of efi.Tengo version 1201 bios is the last think you bag for my motherboard, but the link to this post

---

where I can get without flashing the bios and the correct configuration to boot?. My processor is the Intel Core 2 Duo and 8400, Asus P5K motherboard, ram ddr2 Kinston 2 g * 2, GeForce 9800GT card, I think as I have looked at are all compatible components