(07-11-2011, 06:51 AM)Dansolo Wrote: Intel Matrix RAID 10.5.1.1070
Marvell 88SE9123 OROM and E6/E7 firmware version 1029
UNTESTED, use at your own risk.
Hi everyone!
I need serious help here!
I am not a newbie and i already flash and play with this since my 1st AMD Duron 600Mhz :-)
So, i saw this custom BIOS, and i also saw the comment it was working.
I already had the 0701 version.
I used EZFlash 2 and used the customized bios with Marvel and Intel Firmwares from USB
Flash finished and system reboots.
During the 1st boot i received the message: Upgrading ATA firmware.....
5min later: Update finished with success.
20min later nothing else happens.
Numlock was working.. so system was not hanged.
I pressed reset bottom, but keep in mind this was 30min after, and everything was nice.
Now when i boot, the system boots, i see the CPU, memory, he starts detecting the HDD bellow..... and when it changes the screen to go to INTEL.. the screen stays black!! and beep beep beep really fast at this point
So, even that i try to ez flash or enter bios i just cant, because that is only after Intel and Marvel bios shows up
What can i do now?
I am desperated :\