[Closed,risky test] Bios Unlock Request for Toshiba

[camiloml]

You missunderstood me, that is all your bios has into it.

Look into the file i uploaded if you see any option that is not visible in your bios setup and you think can be interesting and i will try to unhide it for you.

[survi]

I get it now.
To be honest... some 70% of the entries visible in the file you've uploaded are NOT visible in my bios. That's why I was so surprised about the possibilities of my bios...
I will go through it once more cause I didn't note anything by now, I got to check over the net what which option does. I'm gonna let You know in a few days cause I'm working everyday now and just may have no time for this.

[survi]

Ok, so there are the things I would like to trick with on my bios:

0x1b: Azalia
0x1c: Lan
0x1d: IDE Controller
0x1e: Primary IDE Cable Type
0x1f: SATA Controller Mode:
0x21: ATA/IDE Mode
0x2a: 32Bit I/O:
0x2b: Block Mode:
0x2c: Transfer Mode:
0x2d: Type :
0x2e: 32Bit I/O:
0x2f: Block Mode:
0x30: Transfer Mode:
0x39: PEG Aperture Size
0x3a: IGD - Pre-allocat Memory:
0x3b: Clock Chip Initialize:
0x6b: IGD - LCD Panel Type:
0x6e: IGD - Panel Scaling:
0x6f: GMCH BLC Control:
0x70: BIA Control:
0x77: IGD - DVMT Size:
0x78: IGD - Device2,Function1:
0x7b: PCI Latency Timer
0x7c: Extended Configuration
0x7d: System Memory Frequency
0x7e: RAM Timing Control
0x7f: RAM RAS Act. to Pre.
0x80: RAM CAS# Latency
0x81: RAM RAS# to CAS# delay
0x82: RAM RAS# Precharge
0x87: HPET - HPET support
0x9f: TPM Operation
0x113: Intel 3945ABG LAN Card
0x114: DMI Link ASPM Control
0x115: Automatic ASPM
0x116: ASPM L0s Support
0x117: ASPM L0sL1 Support
0x118: ASPM
0x119: Automatic ASPM
0x11a: ASPM L0s
0x11b: ASPM L0s Aggressiveness
0x11c: ASPM L1
0x11d: Extended Synch
0x11e: P-States(IST)
0x11f: Thermal Mode
0x120: Fan On Temperature
0x121: Throttle On Temperature
0x122: Execute-Disable Bit Capability:
0x123: PCI Clock Run:
0x124: _CST - C4 Latency Value:
0x125: C4 on C3 - Deeper Sleep:
0x126: EMTTM
0x127: Bi-directional PROCHOT#
0x128: Dynamic FSB Switching
0x129: Intel Dynamic Acceleration:
0x12a: ACPI 3.0 T-States
0x12b: Boot performance mode
0x12c: ACPI S1:
0x12d: ACPI S3:
0x135: Quickly S4 Resume
0x136: C-State Pop Up Mode
0x137: C-State Pop Down Mode
0x139: Intel Virtualization Technology:
0x13c: C-States
0x13d: Enhanced C-States
0x13e: DeepC4
0x13f: Hard C4E
0x141: Core Multi-Processing:
0x142: DTS
0x143: DTS Calibration
0x146: PXE Boot to LAN
0x147: Mobile RAID
0x14b: IGD Thermal
0x14e: Boot Menu Type
0x180: Internal CIR:
0x184: Intel® Turbo Memory
0x194: Dynamic CPU Frequency Mode:
0x19a: HDMI-CEC

This might be a lot of work (I don't know how you do it but I believe that You have to change every single setting manually)... If this is too much then let me know or give a tip of how to do it

Thanks
ps. there might be some thinsgs already unlocked, I just don't remember which, but surely almost all of this is not available from the typical bios configuration screen...

[camiloml]

I need to know exactly which ones are visible and which ones are locked, think that i must blindly change the condition that make a option visible or not, i don't know if for your machine is visible, so i need detailed list. Just things you want but don't see in bios.

[camiloml]

I have made a first test to see if something changes, test it, download mod in my second folder.

[survi]

Ok then, I'm going to study every single entry in my original bios so You can be sure what exactly IS available and what's not
btw. 'test it' You mean to flash it to my motherboard? Cause I don't know the way to restore the backup in case of failure... May not be able to come back to this forum after such a disaster))

[camiloml]

Ufff if you don't have a spare pc other than the notebook i encourage you to forget about modded bios.

[survi]

Well I got one, but that's a notebook too...
In case of failure I would have to solder out the bios chip out of the mainboard, put it into the compatible programmator and then overwrite it with the original one and then again solder it into the mobo to check if it works... Looks lika a lot of unnecessary problems. Anyway that's a far too risky...
I think that it will end our topic, sorry I caused You so many problems I shuold have checked it before posting the thread

Next thing to do ---> laptop with dual bios or just the Alienware so there won't be any need to overclock/mod/tune it in any way I believe

Thank You and sorry for the trouble

ps. I believe there will be more guys like me with notebook containing Insyde H2O bios, just let them know how much it takes to safely mod the bios in their laptops

[camiloml]

Ok, don't worry. Topic parked