I've flashed the system, rebooted, and hit F2 during startup.
I go to the cpu settings and found out that the + key (add value) didn't work, then I exit without saving changes. Then I booted to windows and shut down the system
I then went to the BIOS again and go to thermal, I set the CPU to throttle at 103 and shut down at 113. And I decreased the fan trip point 0 and 1 one thermal point down.
Now the laptop cannot boot, when I turn it on. The laptop just sit there with indicator lights on for a few seconds. I then downloaded an original BIOS from asus, extracted it and made two copies. I renamed the 1st one AMIBOOT.ROM and the second just change the .209 to .BIN.
I powered it on and held CTRL+WINKEY (home) to insert the CD, then shut the laptop down. I booted again to force flash the CD BIOS to the EEPROM, but it didn't work and still blankscreen until I released the key and let the laptop autoshutdown
I dunno if the BIOS is corrupt (but how did it boot when I exit without saving?) or the intel chipset doesn't like the thermal config I altered.
HELP
BTW I have yet to use a FAT-32 formatted USB drive, there's 4 USB ports, 2 left and 2 right (1 is usb 3).
I also left the laptop without the battery or power adapter attached, hoping to reset the BIOS.
I don't know if this laptop has a BIOS battery ot a CMOS jumper. I never disassembled it.