Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 8 Vote(s) - 4.88 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
[REQUEST] Acer PT715-51 (Triton 700) ins...
Last Post: Dudu2002
Today 10:49 AM
» Replies: 24
» Views: 12298
[REQUEST] Lenovo IdeaPad U310 & U410 (65...
Last Post: Dudu2002
Today 08:59 AM
» Replies: 1782
» Views: 498122
[REQUEST] Acer Aspire 9300 BIOS Unlock
Last Post: Geortor
Yesterday 04:01 PM
» Replies: 10
» Views: 2223
Lenovo ThinkCentre M700 10GS - Kaby Lake...
Last Post: DeathBringer
Yesterday 02:55 PM
» Replies: 10
» Views: 3777
[Request] Asus H110M-R Mainboard - Xeon ...
Last Post: kusslegyen
Yesterday 02:04 PM
» Replies: 14
» Views: 6741
LGA771 Bios Microcode for HP dc7800 sff
Last Post: Netuser232
Yesterday 01:27 PM
» Replies: 136
» Views: 92068
Dell Vostro 3500 full unlocked
Last Post: kamilchno
Yesterday 10:51 AM
» Replies: 0
» Views: 57
Bios logo
Last Post: Nkosenhle
Yesterday 10:43 AM
» Replies: 0
» Views: 65
Gigabyte AORUS 5 (KB/SB/MB) BIOS Unlock
Last Post: Dudu2002
Yesterday 10:41 AM
» Replies: 18
» Views: 4794
[REQUEST] Lenovo G580 (5ECNxxWW) Whiteli...
Last Post: Dudu2002
Yesterday 09:09 AM
» Replies: 1730
» Views: 672377
[REQUEST] Lenovo Thinkpad X230(i) (G2ETx...
Last Post: willow25565
Yesterday 02:06 AM
» Replies: 1090
» Views: 451474
[REQUEST] Lenovo Thinkpad Edge E430 & E5...
Last Post: RuryGame
11-25-2024 06:23 PM
» Replies: 494
» Views: 171213
2x CPU Dell Workstation BIOS modding
Last Post: William P
11-25-2024 03:30 PM
» Replies: 0
» Views: 96
[REQUEST] Lenovo T440(S) (GJETxxWW) Whit...
Last Post: Dudu2002
11-25-2024 01:28 PM
» Replies: 492
» Views: 186069
[Request] ECS P6LX-A bios mod for HDD si...
Last Post: pdesrosiers
11-24-2024 11:20 PM
» Replies: 0
» Views: 359
Sony Vaio AW11Z - Support for Quad CPU -...
Last Post: lala2025
11-24-2024 08:19 PM
» Replies: 12
» Views: 3885
[REQUEST] HP Pavilion G42-272BR Whitelis...
Last Post: eepromm
11-24-2024 06:14 PM
» Replies: 1
» Views: 211
[REQUEST] Bios for packard bell tj65 wit...
Last Post: THECAIDA
11-24-2024 03:49 PM
» Replies: 2
» Views: 166
[REQUEST] Lenovo G710 BIOS Whitelist Rem...
Last Post: Dudu2002
11-24-2024 02:47 PM
» Replies: 476
» Views: 168783
[REQUEST] Lenovo G50-70 (9ACNxxWW) White...
Last Post: tarikyeter
11-24-2024 02:44 PM
» Replies: 236
» Views: 89358

HP MCP61PM-HM (Nettle2) 5.27 With Unlocked Overclocking Options
I need help with this error message
"you have a new cpu installed in your system
f1 setup
f2 load defaults and continue"

I think that this is a bios error and that is why I am posting here.

I have updated the bios and no help, I have gone into the bios and made

changes that could not be saved because the error message comes back and

when you press f2 every thing is set back to default. I have tried to tatto this

computer but every thing in the tatto takes except the feturebyte. Now for some

reason if you know about tattooing, the feturebyte should be ten block of 4

characters but for some reason on this computer it is eleven blocks of four

characters. I have no idea as to what I can do from here. I have changed nothing

on this computer, it is the same way it was when it was given to me. I need help.

Can you please help me. I want to be able to use my cool and quit on this

computer but can't because of the error message. I want to be able to boot with

out having to press f2 every time. Please help me!

I was given this hp pavilion media center m8226x computer with the following

specs.

CPU AMD® Socket AM2/AM2+ for AMD Phenom™ FX / Phenom / Athlon™ /

Sempron™
AMD Cool'n'Quiet™ Technology
AMD64 architecture enables simultaneous 32-bit and 64-bit computing

Chipset GeForce 7025/ nForce630a
Front Side Bus 2000 / 1600 MT/s
Memory 2 x DIMM, max. 4GB, DDR2 1066 / 800 / 667, ECC,non-ECC, un-buffered

memory
Dual channel memory architecture
*Due to AMD CPU limitation, DDR2 1066 is supported by AM2+ CPU for one

DIMM per channel only.
Expansion Slots 1 x PCIe x16
1 x PCIe x1
1 x PCI
VGA Integrated Programmable Shader model3.0 DirectX 9 graphics processor
Maximum shared memory of 256 MB
Supports RGB with max. resolution 1920 x1440 (@75Mhz*32bpp)
Storage Chipset built-in
- 1 x Ultra DMA 133 / 100
- 2x Serial ATA 3Gb/s connectors support RAID 0,1,JBOD configurations on

Windows Vista OS
LAN RTL8201CP Phy 100/10M
Audio ALC662 High Definition Audio 6-channel CODEC
USB 10 x USB 2.0 ports (6 ports at mid-board, 4 ports at back panel)
Special Features ASUS Quiet Thermal Solution:
- ASUS Q-Fan

ASUS EZ DIY:
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
ASUS MyLogo 2

Back Panel I/O Ports 1 x PS/2 Keyboard port
1 x Mouse port
1 x RJ45 port
1 x VGA
1x COM
4 x USB 2.0/1.1
6-Channel Audio I/O
Internal I/O Connectors 3 x USB connector (6 ports)
2 x SATA connectors
1 x CPU Fan connector
1 x Front panel audio connector
1 x IDE connector
1 x Internal speaker connector
1 x CD audio in connector
1 x 24-pin EATX Power connector
1 x 4-pin ATX +12V Power connector
1 x System Panel connector
BIOS 8 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a
Accessories 1 x UltraDMA 133/100/66 cable
1 x SATA cable
1 x I/O Shield
User's manual
Support Disc Drivers
ASUS PC Probe II
ASUS Update
Anti-virus software (OEM version)
Form Factor uATX Form Factor, 9.6”x 8.0”

mrcblake
mrcblake@yahoo.com
find
quote
It says all the download links for the newest modified bios for neetle2 are broken Sad and I cannot find them. Please fix the downloads so I can get them.

Thanks
find
quote
Ok so I didn't know where else to turn. I flashed this bios onto my cmos a couple of months ago and everything worked out great. I haven't tweaked any of the settings other than the ones mentioned on the front page listed as necessary. The original reason for this was I had what apparently was a corrupted bios and figured why not right? Well now I'm attempting to install some beefier memory into the mobo but when I turn the computer on it gives me 5 beeps, a pause, then an infinite string of beeps(I stopped counting after 50). The memory appears to be compatible with the motherboard according to this page http://bizsupport1.austin.hp.com/bizsupp...=c01077676
I believe this is the memory I am attempting to install
http://www.ocztechnology.com/ocz-ddr2-pc...n-eol.html
I say I believe because I didn't actually purchase this memory rather it was given to me by a friend who upgraded from the ddr2 stuff long ago. The sticker on the memory says pc2 6400 2GB Dual CH Reaper Series 4-4-4 PN:OCZ2RPR800C44GK

Is this a quirk with the bios or am I missing something?

Oh I forgot to mention I have 2 sticks of this memory and tried each one individually in each slot and it seems unlikely that both are bad though I have no other means available to test them.
find
quote
I still have yet to find a solution on my own. Please help.

(07-25-2012, 10:12 AM)mrcblake Wrote: I need help with this error message
"you have a new cpu installed in your system
f1 setup
f2 load defaults and continue"

I think that this is a bios error and that is why I am posting here.

I have updated the bios and no help, I have gone into the bios and made

changes that could not be saved because the error message comes back and

when you press f2 every thing is set back to default. I have tried to tatto this

computer but every thing in the tatto takes except the feturebyte. Now for some

reason if you know about tattooing, the feturebyte should be ten block of 4

characters but for some reason on this computer it is eleven blocks of four

characters. I have no idea as to what I can do from here. I have changed nothing

on this computer, it is the same way it was when it was given to me. I need help.

Can you please help me. I want to be able to use my cool and quit on this

computer but can't because of the error message. I want to be able to boot with

out having to press f2 every time. Please help me!

I was given this hp pavilion media center m8226x computer with the following

specs.

CPU AMD® Socket AM2/AM2+ for AMD Phenom™ FX / Phenom / Athlon™ /

Sempron™
AMD Cool'n'Quiet™ Technology
AMD64 architecture enables simultaneous 32-bit and 64-bit computing

Chipset GeForce 7025/ nForce630a
Front Side Bus 2000 / 1600 MT/s
Memory 2 x DIMM, max. 4GB, DDR2 1066 / 800 / 667, ECC,non-ECC, un-buffered

memory
Dual channel memory architecture
*Due to AMD CPU limitation, DDR2 1066 is supported by AM2+ CPU for one

DIMM per channel only.
Expansion Slots 1 x PCIe x16
1 x PCIe x1
1 x PCI
VGA Integrated Programmable Shader model3.0 DirectX 9 graphics processor
Maximum shared memory of 256 MB
Supports RGB with max. resolution 1920 x1440 (@75Mhz*32bpp)
Storage Chipset built-in
- 1 x Ultra DMA 133 / 100
- 2x Serial ATA 3Gb/s connectors support RAID 0,1,JBOD configurations on

Windows Vista OS
LAN RTL8201CP Phy 100/10M
Audio ALC662 High Definition Audio 6-channel CODEC
USB 10 x USB 2.0 ports (6 ports at mid-board, 4 ports at back panel)
Special Features ASUS Quiet Thermal Solution:
- ASUS Q-Fan

ASUS EZ DIY:
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
ASUS MyLogo 2

Back Panel I/O Ports 1 x PS/2 Keyboard port
1 x Mouse port
1 x RJ45 port
1 x VGA
1x COM
4 x USB 2.0/1.1
6-Channel Audio I/O
Internal I/O Connectors 3 x USB connector (6 ports)
2 x SATA connectors
1 x CPU Fan connector
1 x Front panel audio connector
1 x IDE connector
1 x Internal speaker connector
1 x CD audio in connector
1 x 24-pin EATX Power connector
1 x 4-pin ATX +12V Power connector
1 x System Panel connector
BIOS 8 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a
Accessories 1 x UltraDMA 133/100/66 cable
1 x SATA cable
1 x I/O Shield
User's manual
Support Disc Drivers
ASUS PC Probe II
ASUS Update
Anti-virus software (OEM version)
Form Factor uATX Form Factor, 9.6”x 8.0”

mrcblake
mrcblake@yahoo.com

Did you try flashing with win98dos? I know I had some crazy problems the first time when I tried flashing the bios in Vista, I don't exactly have any more advice beyond that other than to re-flash and failing that, try re-seating parts on your mobo.
find
quote
Hey guys,

I know this is an aging thread but I have a question relating to the CPU voltage controls on the HP Nettle2 MCP61PM-HM board. I flashed my BIOS successfully with the modified version which gave me control over the DIMM voltage but I cannot find the CPU voltage settings.

I had a look at the other reply threads but didn't see a solution. Am I missing something or is it simply a case of the HP Nettle2 not supporting CPU voltage even after the BIOS flash?

Cheers,
(:
find
quote
(08-20-2012, 09:40 PM)Weinerific Wrote: Hey guys,

I know this is an aging thread but I have a question relating to the CPU voltage controls on the HP Nettle2 MCP61PM-HM board. I flashed my BIOS successfully with the modified version which gave me control over the DIMM voltage but I cannot find the CPU voltage settings.

I had a look at the other reply threads but didn't see a solution. Am I missing something or is it simply a case of the HP Nettle2 not supporting CPU voltage even after the BIOS flash?

Cheers,
(:

At one time, The Wiz had posted a special version with that option available. The option is hidden in the BIOS, but can be unlocked. I used modbin and did it myself. You can too. It's easy. I think it gives you an option for Vcore. Good luck.
find
quote
I have an HP A6347c computer, Will this BIOs work??

How do i do it from Linux?? fedora 17
find
quote
(08-08-2012, 11:11 PM)sidvicious512 Wrote: Ok so I didn't know where else to turn. I flashed this bios onto my cmos a couple of months ago and everything worked out great. I haven't tweaked any of the settings other than the ones mentioned on the front page listed as necessary. The original reason for this was I had what apparently was a corrupted bios and figured why not right? Well now I'm attempting to install some beefier memory into the mobo but when I turn the computer on it gives me 5 beeps, a pause, then an infinite string of beeps(I stopped counting after 50). The memory appears to be compatible with the motherboard according to this page http://bizsupport1.austin.hp.com/bizsupp...=c01077676
I believe this is the memory I am attempting to install
http://www.ocztechnology.com/ocz-ddr2-pc...n-eol.html
I say I believe because I didn't actually purchase this memory rather it was given to me by a friend who upgraded from the ddr2 stuff long ago. The sticker on the memory says pc2 6400 2GB Dual CH Reaper Series 4-4-4 PN:OCZ2RPR800C44GK

Is this a quirk with the bios or am I missing something?

Oh I forgot to mention I have 2 sticks of this memory and tried each one individually in each slot and it seems unlikely that both are bad though I have no other means available to test them.


Looks like this could be a voltage problem. Your memory specs say 2.20V and this bios offers 1.8 and 1.9 however I've not been able to make the 1.9V stick in 8 months of use.

I,ve also found some processors will not boot with dual channel mem configuration, this is a puzzle I haven't solved. It may have to do with the cpu's onboard memory controller. My Athlon 64x2 4600+ and 6000+ 3.1 Ghz. will not boot dual channel but the athlon 64x2 6000+ 3.0 will. The 4600+ overclocked to 2.7 single channel nicely and the 6000+ is at 3.2 dual channel and very stable.
I'm using 4 -2GB G-Skill pc2-6400 @ 533Mhz.

I hope you get it working if you haven't already.
find
quote
how do you do this from linux? debian or fedora??
find
quote
Thumbs Up 
So I have a problem and I hope you can help me with it.

I have Bios Version 5.20

I can't update to 5.27 because I have Windows 7 64-bit. The HP update won't work with Windows 7; so as far as I can tell, I am stuck with the 5.20 version.

Do I need 5.27 to mod the bios with the work and files you've added here?

Can you do anything to help me? Please?

I appreciate your time and work.

Your problem is likely dust. Dust most likely got in your circuits. All you need to do is take out your RAM; get a can of air spray for computers/electronics and go to work. Make sure everything is dusted off as best as possible; then put your PC back together.

This has happened to me in the past and it worked perfectly. My computer turned on normally.

Cheers, Dodgy

(08-08-2012, 11:11 PM)sidvicious512 Wrote: Ok so I didn't know where else to turn. I flashed this bios onto my cmos a couple of months ago and everything worked out great. I haven't tweaked any of the settings other than the ones mentioned on the front page listed as necessary. The original reason for this was I had what apparently was a corrupted bios and figured why not right? Well now I'm attempting to install some beefier memory into the mobo but when I turn the computer on it gives me 5 beeps, a pause, then an infinite string of beeps(I stopped counting after 50). The memory appears to be compatible with the motherboard according to this page http://bizsupport1.austin.hp.com/bizsupp...=c01077676
I believe this is the memory I am attempting to install
http://www.ocztechnology.com/ocz-ddr2-pc...n-eol.html
I say I believe because I didn't actually purchase this memory rather it was given to me by a friend who upgraded from the ddr2 stuff long ago. The sticker on the memory says pc2 6400 2GB Dual CH Reaper Series 4-4-4 PN:OCZ2RPR800C44GK

Is this a quirk with the bios or am I missing something?

Oh I forgot to mention I have 2 sticks of this memory and tried each one individually in each slot and it seems unlikely that both are bad though I have no other means available to test them.
find
quote


Forum Jump:


Users browsing this thread: 16 Guest(s)