InsydeH20 v3.5
Laptop Model: HP Tm2t-2100
Bios Version: F.25
Bios DL Link: http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52359.exe
According to your sticky it is RSA signed, I wasn't able to open it up in the editor but the flash file starts with 01.
I'm looking to turn this into a Hackintosh, so I am trying to get to the advanced configuration options; mainly enable AHCI, enable/disable video adapters, ACPI Suspend Types, HPET Mode and whatever else you are able to gain access to is great too.
Here are the current menus:
[Main] [Security] [Diagnostics] [System Configuration] [Exit]
[Main]
<System Time>
<System Date>
<Diagnostic Log>
[Security]
<Administrator Password>
<Power-on Password>
[Diagnostics]
<Primary Hard Disk Self Test>
<Memory Test>
[System Configuration]
<Language>
<Virtualization Technology>
<Lan Power Savings>
<Fan Always On>
<Action Keys Mode>
<Auto boot when AC is plugged in>
<Boot Options>
--<POST Hotkey Delay (sec)>
--<HP QuickWeb>
--<Floppy Boot>
--<Internal Network Adapter Boot>
--<Boot Order>
----<USB CD/DVD ROM Drive>
----<Notebook Hard Drive>
----<USB Diskette on Key/USB Hard Disk>
----<! USB Floppy>
----<! Network Adapter>
[Exit]
<Exit Saving Changes>
<Exit Discarding Changes>
<Load Setup Defaults>
Thanks a ton!
Guess I should have searched better before posting a request.
Apparently you can access these by hitting <F10> + <A> at the same time when powering on the unit.
Thanks anyway though.
Laptop Model: HP Tm2t-2100
Bios Version: F.25
Bios DL Link: http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52359.exe
According to your sticky it is RSA signed, I wasn't able to open it up in the editor but the flash file starts with 01.
I'm looking to turn this into a Hackintosh, so I am trying to get to the advanced configuration options; mainly enable AHCI, enable/disable video adapters, ACPI Suspend Types, HPET Mode and whatever else you are able to gain access to is great too.
Here are the current menus:
[Main] [Security] [Diagnostics] [System Configuration] [Exit]
[Main]
<System Time>
<System Date>
<Diagnostic Log>
[Security]
<Administrator Password>
<Power-on Password>
[Diagnostics]
<Primary Hard Disk Self Test>
<Memory Test>
[System Configuration]
<Language>
<Virtualization Technology>
<Lan Power Savings>
<Fan Always On>
<Action Keys Mode>
<Auto boot when AC is plugged in>
<Boot Options>
--<POST Hotkey Delay (sec)>
--<HP QuickWeb>
--<Floppy Boot>
--<Internal Network Adapter Boot>
--<Boot Order>
----<USB CD/DVD ROM Drive>
----<Notebook Hard Drive>
----<USB Diskette on Key/USB Hard Disk>
----<! USB Floppy>
----<! Network Adapter>
[Exit]
<Exit Saving Changes>
<Exit Discarding Changes>
<Load Setup Defaults>
Thanks a ton!
Guess I should have searched better before posting a request.
Apparently you can access these by hitting <F10> + <A> at the same time when powering on the unit.
Thanks anyway though.