Gateway P-7811fx slic 2.1 request

[SeanFL]

Have a Gateway P-7811FX. Request for anyone to repost a slic 2.1 modded bios. There were links from a couple years ago but all are dead now.

If the file isn't handy, ideally I'd like to use a dell win 7 disc to install. The machine currently has windows 7 32 bit. (original message said 64, but I had problems flashing a 64 bit bios from 64 bit windows from some reasons...so have moved to 32 bit to get it done).

The original bios is available here:
http://support.gateway.com/support/drive...?st=browse&platform=10022&model=12115&os=&type=

Thanks very much if anyone has the older slic 2.1 file or can modify this one.

Sean

[sovem]

Have a Gateway P-7811FX. Request for anyone to repost a slic 2.1 modded bios. There were links from a couple years ago but all are dead now.

If the file isn't handy, ideally I'd like to use a dell win 7 disc to install. The machine currently has vista 64 bit.

The 64 bit original bios is available here:
http://support.gateway.com/support/drive...?st=browse&platform=10022&model=12115&os=&type=

Thanks very much if anyone has the older slic 2.1 file or can modify this one.

Sean

Please, post RWE report.

[SeanFL]

Here are the tables. Prior to running the RWE, I updated to the recent bios linked above using 32 bit windows (I couldn't get the 64 bit to flash). Thank you.

[SeanFL]

Did I export and zip the tables correctly? Thanks in advance if anyone is able to help get this gateway bios slic 2.1 ready.

[sovem]

Did I export and zip the tables correctly? Thanks in advance if anyone is able to help get this gateway bios slic 2.1 ready.

Slic: ACER 2.1
Bios mod: Gateway_P-7811FX_IMV3532_9C.20.00_ACER21
https://www.box.com/s/uh8gj9horiw8zbf70lsl
Update from DOS (with USB-bootable); Type: flash.bat
Please post results.

[SeanFL]

thanks Sovem. Gives me "Phoenix phlash16 error. Invalid flashint.bin. press any key to exit."

I used a Hiren boot cd to boot into dos, then ran the bat file you gave on a usb stick. If I'm going about it wrong, thanks for any guidance.


Sean

[sovem]

thanks Sovem. Gives me "Phoenix phlash16 error. Invalid flashint.bin. press any key to exit."

I used a Hiren boot cd to boot into dos, then ran the bat file you gave on a usb stick. If I'm going about it wrong, thanks for any guidance.


Sean

Try this: https://www.box.com/s/x9zdtzhlxwx121oq5ubj
Run P7811FX.exe to create USB-boot. Reboot to DOS with USB-boot and type flash.bat
Please post results.
(If error again, next mod for windows)

[SeanFL]

got the same "phoenix phlash16 error, invalid flashint.bin"

really appreciate you working on it for me. Sean

[sovem]

got the same "phoenix phlash16 error, invalid flashint.bin"

really appreciate you working on it for me. Sean

OK
Try: Gateway_P78_BIOS_IMV3532_9C.20.00_ACER21_Dyn
https://www.box.com/s/irvocsh0vb6hph2brbbv
Update from windows. Run IMV-038.exe as administrator (x64 or x32)
Please post results.

[SeanFL]

thanks, that allowed the bios to update...whew! Will report back how its running. Thank you.