HOW TO FLASH MODIFIED OR ORIGINAL BIOS (PHOENIX)

[AHMED HOSSAM]

Hi All ,

I thought about writing this thread as i see there are alot of problems for members with flashing their own original PHOENIX bioses or the Modified bioses in this section .
The process is very easy , just follow these steps :-

1 ) You`d better flash from dos using a bootable usb drive .......... you should have any bootable USB or floppy .
2 ) Download the HP tool which will make your floppy or USB bootable & the DOS98 files from this link :

http://www.mediafire.com/?1b2zr67o1y5v4gr

3 ) Create the Bootable USB or FLOPPY using the tool with options in this pic :-



4 ) Copy the BIOS.WPH ( original or modified ) to the USB drive and copy the PHLASH16.EXE as well ( provided in the previous link with the HP tool ) .

5 ) Boot from the USB drive and write this command after it boots :-

PHLASH16 /S /X /FORCE
then press ENTER .

The bios will be flashed and don`t interrupt this process in any way as it will make your bios bricked .

Thank you

[darkan99el]

Ahmed, flashing Bios as I type.

Ok finished flashing and woah! loads more stuff and my beloved AHCI mode is there.

very impressed

[TSOPrano]

Thanks for providing the info, just need to find a suitable BIOS mod now or even better learn how to do my own!

[ajen82]

my laptop acer aspire 4750G which uses phoenix uefi bios, can you help me to flash from crysis recovery mode? my laptop can't turn on (black screen).

Thanks..

[TheWiz]

Hi Ajen,

Please see this article:

http://www.bios-mods.com/bios-recovery/p...-recovery/

TheWiz

[Frenchdavy83]

Hya, i just bricked my daughter satellite C660 i updated from the Toshiba support center the bios and while doing it, the machine stopped and impossible to restart nothing at all black screen just the fan are turning but after 2 minutes of doing it goes off again. Please i cant afford a new one and if someone could show me the way, i would be so greatfull.
I just made a bootable usb drive but after that its all a bit confusing.
Thanks for helping me!!
Frenchdavy83

[matt167]

Hya, i just bricked my daughter satellite C600 i updated from the Toshiba support center the bios and while doing it, the machine stopped and impossible to restart nothing at all black screen just the fan are turning but after 2 minutes of doing it goes off again. Please i cant afford a new one and if someone could show me the way, i would be so greatfull.
I just made a bootable usb drive but after that its all a bit confusing.
Thanks for helping me!!
Frenchdavy83

Sounds like it's really bricked.. When that happens, it's probably not recoverable. Best idea is a new Mobo,
http://www.ebay.com/itm/Toshiba-Satellit...therboards&hash=item4175ad240b

If your going to update a bios from windows, it needs to be with all programs closed including antivirus and then shut down as many user run services as you can to lessen your chance of bricking. Otherwise Bios flashing is best done from Dos if your machine can do that. Not all can anymore without third party software

[Frenchdavy83]

NAN I heard of bios recovery from usb drive

[jaylee75]

Hi All ,

I thought about writing this thread as i see there are alot of problems for members with flashing their own original PHOENIX bioses or the Modified bioses in this section .
The process is very easy , just follow these steps :-

1 ) You`d better flash from dos using a bootable usb drive .......... you should have any bootable USB or floppy .
2 ) Download the HP tool which will make your floppy or USB bootable & the DOS98 files from this link :

http://www.mediafire.com/?1b2zr67o1y5v4gr

3 ) Create the Bootable USB or FLOPPY using the tool with options in this pic :-



4 ) Copy the BIOS.WPH ( original or modified ) to the USB drive and copy the PHLASH16.EXE as well ( provided in the previous link with the HP tool ) .

5 ) Boot from the USB drive and write this command after it boots :-

PHLASH16 /S /X /FORCE
then press ENTER .

The bios will be flashed and don`t interrupt this process in any way as it will make your bios bricked .

Thank you

I've done exactly what you said here but when I press enter, all that happens is I get a list of command options for Phlash16, I press enter a few times to scroll through the commands and then return to C: again.

Please help.

[HEYZOOS]

Am I being dumb, I have the original and modded 1.46 for downgrading from 1.48 on my Lenovo ThinkPad T420 and i'm struggling to make this solution work even though i'm told on here it's the solution?! Any help would be much appreciated. Thank you all once again