|
Welcome
|
You have to register before you can post on our site.
|
|
|
[READ FIRST] Access Advanced settings through EFI shell
|
Posts: 9
Threads: 1
Joined: May 2013
Reputation:
0
(05-15-2013, 07:26 AM)Falseclock Wrote: (05-15-2013, 07:11 AM)Slbomber Wrote: HP g6-2158sr
Insyde H20
Bios version: F.24
Bios type: Insyde EFI
I need to disable a Intel integrated graphics.. I need to ONLY my discrete videocard, it's possible?
Link: http://ftp.hp.com/pub/softpaq/sp60501-61000/sp60587.exe
1. Take this BIOS.
2. Unpack with any unzip software
3. Find platform.ini
4. Edit following lines in it
Code: [BackupROM]
Flag=1
FilePath=c:
FileName=0183AF24.BIN
6. After reboot you will find dumped current BIOS on C drive
7. Upload dump somewhere and give download link
(05-15-2013, 07:11 AM)Slbomber Wrote: I need to disable a Intel integrated graphics.. I need to ONLY my discrete videocard, it's possible? Theoretically it is possible, but nobody can guaranty notebook will startup without internal VIDEO, even if such option is exist in the BIOS. If black screen is happen, you can take out BIOS battery to erase VSS memory and return default options. Anyway you have to create UEFI bios recovery USB stick and test it before changing any options. This is my advice.
You should understand, possible behavior - is forever brick.
I had such experience when was enabling "disabled by default" such devices like USB, SATA, LAN
But never tested VIDEO
Thank you for answer)) Backuped BIOS download link: http://rghost.ru/46020863
And more one question: how do i create UEFI USB recovery disk for BIOS?
Posts: 64
Threads: 3
Joined: Apr 2013
Reputation:
8
05-15-2013, 11:49 AM
(This post was last modified: 05-15-2013, 11:53 AM by Falseclock.)
(05-15-2013, 11:07 AM)Slbomber Wrote: Thank you for answer)) Backuped BIOS download link: http://rghost.ru/46020863
And more one question: how do i create UEFI USB recovery disk for BIOS?
Вот твой биос
Here is your Video menu in advanced section
Code: ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0025' ]│
└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Subtitle: 'Video Configuration'
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Special Features' [ VarStore: '0x1e6', QuestionId: '0x92', Help: 'Enable Switch Graphic Function']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Primary Display ' [ VarStore: '0x192', QuestionId: '0xa03', Help: 'Primary Display ']
Option: 'IGFX' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'PEG' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'PCI' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'SG' [ Value: '4' Default: 'true' Type: 'int8' ]
Reference: 'Internal Graphic Device' [ FormID: '0x0250', QuestionId: '0x93', VarStore: '0xffff' ]
Reference: 'Pci Express Graphic' [ FormID: '0x0251', QuestionId: '0x94', VarStore: '0xffff' ]
Reference: 'SA DMI Configuration' [ FormID: '0x0252', QuestionId: '0x95', VarStore: '0xffff' ]
┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0250' ]│
└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Subtitle: 'Internal Graphic Device'
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Internal Graphics Device ' [ VarStore: '0x193', QuestionId: '0xa02', Help: 'Enable IGD ']
Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'RC6 (Render Standby)' [ VarStore: '0x194', QuestionId: '0x96', Help: 'Graphic Render C-State(RC6) is a technique designed to optimize the average power to the graphics render engine during times of idleness of the render engine.']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Deep Render Standby' [ VarStore: '0x20a', QuestionId: '0x97', Help: 'Configure Deep Render Standby']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - Gtt Size' [ VarStore: '0x195', QuestionId: '0xa01', Help: 'Select the Gtt size']
Option: '1 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '2 MB' [ Value: '2' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - Aperture Size' [ VarStore: '0x197', QuestionId: '0xa04', Help: 'Select the Aperture Size ']
Option: '128 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '256 MB' [ Value: '2' Default: 'true' Type: 'int8' ]
Option: '512 MB' [ Value: '3' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - DVMT Pre-Allocated' [ VarStore: '0x198', QuestionId: '0xa00', Help: 'Select DVMT5.0 Pre-Allocated(Fixed) Graphics Memory size used by the Internal Graphics Device.']
Option: '0 MB' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: '32 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '64 MB' [ Value: '2' Default: 'true' Type: 'int8' ]
Option: '96 MB' [ Value: '3' Default: 'false' Type: 'int8' ]
Option: '128 MB' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: '160 MB' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: '192 MB' [ Value: '6' Default: 'false' Type: 'int8' ]
Option: '224 MB' [ Value: '7' Default: 'false' Type: 'int8' ]
Option: '256 MB' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: '288 MB' [ Value: '9' Default: 'false' Type: 'int8' ]
Option: '320 MB' [ Value: '10' Default: 'false' Type: 'int8' ]
Option: '352 MB' [ Value: '11' Default: 'false' Type: 'int8' ]
Option: '384 MB' [ Value: '12' Default: 'false' Type: 'int8' ]
Option: '416 MB' [ Value: '13' Default: 'false' Type: 'int8' ]
Option: '448 MB' [ Value: '14' Default: 'false' Type: 'int8' ]
Option: '480 MB' [ Value: '15' Default: 'false' Type: 'int8' ]
Option: '512 MB' [ Value: '16' Default: 'false' Type: 'int8' ]
Option: '1024 MB' [ Value: '17' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - DVMT Size' [ VarStore: '0x199', QuestionId: '0x98', Help: ' Select the size of DVMT 5.0 that the Internal Graphics Device will use']
Option: '128 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '256 MB' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'MAX' [ Value: '255' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| Select option: 'IGD - Boot Type' [ VarStore: '0x19a', QuestionId: '0x99', Help: 'Select the Video Device that will be activated during POST']
| Option: 'VBIOS Default' [ Value: '0' Default: 'true' Type: 'int8' ]
| Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
| Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
| Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
| Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
| Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
| Option: 'LFP2' [ Value: '128' Default: 'false' Type: 'int8' ]
└- END IF Suppress;
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| Question [ ID: '0x99' ] == 0x00
| OR expression
└- END IF Suppress;
Select option: 'IGD - Boot Type 2' [ VarStore: '0x19b', QuestionId: '0x9a', Help: 'Select Secondary Display Device']
Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
Option: 'LFP2' [ Value: '128' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| NOT expression
└- END IF Suppress;
Select option: 'IGD - Boot Type' [ VarStore: '0x19a', QuestionId: '0x9b', Help: 'Select the Video Device that will be activated during POST']
Option: 'VBT Default' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| NOT expression
| Question [ ID: '0x9b' ] == 0x00
| OR expression
└- END IF Suppress;
Select option: 'IGD - Boot Type 2' [ VarStore: '0x19b', QuestionId: '0x9c', Help: 'Select Secondary Display Device']
Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - LCD Panel Type' [ VarStore: '0x19c', QuestionId: '0x9d', Help: 'Select the Panel used by the Internal Graphics Device by selecting the appropriate setup item']
Option: '640x480 LVDS' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '800x600 LVDS' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: '1024x768 LVDS1' [ Value: '3' Default: 'true' Type: 'int8' ]
Option: '1280x1024 LVDS' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: '1400x1050 LVDS1' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: '1400x1050 LVDS2' [ Value: '6' Default: 'false' Type: 'int8' ]
Option: '1600x1200 LVDS' [ Value: '7' Default: 'false' Type: 'int8' ]
Option: '1366x768 LVDS' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: '1680x1050 LVDS' [ Value: '9' Default: 'false' Type: 'int8' ]
Option: '1920x1200 LVDS' [ Value: '10' Default: 'false' Type: 'int8' ]
Option: '1440x900 LVDS' [ Value: '11' Default: 'false' Type: 'int8' ]
Option: '1600x900 LVDS' [ Value: '12' Default: 'false' Type: 'int8' ]
Option: '1024x768 LVDS2' [ Value: '13' Default: 'false' Type: 'int8' ]
Option: '1280x800 LVDS' [ Value: '14' Default: 'false' Type: 'int8' ]
Option: '1920x1080 LVDS' [ Value: '15' Default: 'false' Type: 'int8' ]
Option: '2048x1536 LVDS' [ Value: '16' Default: 'false' Type: 'int8' ]
Select option: 'Backlight Control' [ VarStore: '0x19d', QuestionId: '0x9e', Help: 'Backlight Control Setting']
Option: 'PWM Inverted' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'PWM Normal' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'GMBUS Inverted' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'GMBUS Normal' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'IGD - TV' [ VarStore: '0x19e', QuestionId: '0x9f', Help: 'Select the TV standard used by the Internal Graphics Device']
Option: 'VBIOS Default' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'NTSC' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'PAL' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'SECAM' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'IGD - Gfx Low Power Mode' [ VarStore: '0x19f', QuestionId: '0xa0', Help: 'This option is applicable for SFF only.']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
Select option: 'Active LFP' [ VarStore: '0x1a0', QuestionId: '0xa1', Help: 'Selects the Active LFP Configuration']
Option: 'No LVDS' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Int-LVDS' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'SDVO LVDS' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'eDP' [ Value: '3' Default: 'false' Type: 'int8' ]
Option: 'VBIOS Default' [ Value: '255' Default: 'true' Type: 'int8' ]
Select option: 'Panel Color Depth' [ VarStore: '0x1a1', QuestionId: '0xa2', Help: 'Select the LFP Panel Color Depth']
Option: '18 Bit' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: '24 Bit' [ Value: '1' Default: 'false' Type: 'int8' ]
┌- Suppress IF:
| EQ == TRUE
| └- END IF Suppress;
┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0251' ]│
└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Subtitle: 'Pci Express Graphic'
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'PCIE Reset Delay' [ VarStore: '0x33e', QuestionId: '0xa4', Help: 'Delay for PCIE reset. Set to longer time if PEG doesn't work.']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: '50 ms' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: '100 ms' [ Value: '10' Default: 'true' Type: 'int8' ]
Option: '200 ms' [ Value: '20' Default: 'false' Type: 'int8' ]
Option: '300 ms' [ Value: '30' Default: 'false' Type: 'int8' ]
Select option: 'ASPM' [ VarStore: '0x1a2', QuestionId: '0xa5', Help: 'Control ASPM support for the PEG Device.']
Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ]
Option: 'Auto' [ Value: '4' Default: 'false' Type: 'int8' ]
Select option: 'PEG0 - Gen X' [ VarStore: '0x206', QuestionId: '0xa05', Help: 'Configure PEG0 B0:D1:F0 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'PEG1 - Gen X' [ VarStore: '0x207', QuestionId: '0xa06', Help: 'Configure PEG0 B0:D1:F1 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'PEG2 - Gen X' [ VarStore: '0x208', QuestionId: '0xa07', Help: 'Configure PEG0 B0:D1:F2 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'PEG3 - Gen X' [ VarStore: '0x209', QuestionId: '0xa08', Help: 'Configure PEG0 B0:D6:F0 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| LIST [ ID: '0xa5' ] in ('0x00','0x02','0x04')
| Select option: ' ASPM L0s' [ VarStore: '0x1a3', QuestionId: '0xa6', Help: 'Enable PCIe ASPM L0s.']
| Option: 'Root Port Only' [ Value: '1' Default: 'false' Type: 'int8' ]
| Option: 'Endpoint Port Only' [ Value: '2' Default: 'false' Type: 'int8' ]
| Option: 'Root&Endpoint Ports' [ Value: '3' Default: 'true' Type: 'int8' ]
└- END IF Suppress;
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| LIST [ ID: '0xa5' ] in ('0x00','0x02','0x04')
| Question [ ID: '0xa6' ] == 0x02
| OR expression
└- END IF Suppress;
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Always Enable PEG' [ VarStore: '0x196', QuestionId: '0xa7', Help: 'To enable the PEG']
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| LIST [ ID: '0xa03' ] in ('0x00','0x01','0x02','0x03')
| Question [ ID: '0x92' ] == 0x00
| OR expression
└- END IF Suppress;
Select option: 'PowerXpress Setting' [ VarStore: '0x1e7', QuestionId: '0xa8', Help: 'Setting Mux or Muxless']
Option: 'Muxless Fixed Scheme Only' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: 'Muxless Dynamic Scheme Only' [ Value: '6' Default: 'false' Type: 'int8' ]
Option: 'Muxless Fixed and Dynamic Scheme' [ Value: '7' Default: 'false' Type: 'int8' ]
Option: 'Full dGPU PowerOff Dynamic Scheme' [ Value: '8' Default: 'true' Type: 'int8' ]
Option: 'Fixed and Full dGPU PowerOff Dynamic [ Value: '13' Default: 'false' Type: 'int8' ]
but in your bios option to disable IGD is missing.
Code: Select option: 'Internal Graphics Device ' [ VarStore: '0x193', QuestionId: '0xa02', Help: 'Enable IGD ']
Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
you can try to set 0x193 to 0x0, it should be disabled
1. Take USB stick and format to FAT32
2. Create directory structure EFI\Boot
3. Download BOOTX64.EFI
4. Put downloaded file to Boot directory.
5. Restart and enter BIOS setup.
6. Make sure you have following values:
Legacy Support: Disable
Secure Boot: Disable
7. Reboot and press F9 to boot from USB stick
8. Give command:
setup_var 0x193 0x0
9. Reboot and check
10. REPORT RESULT HERE
in case of failure - remove battery from motherboard
Posts: 9
Threads: 1
Joined: May 2013
Reputation:
0
(05-15-2013, 11:49 AM)Falseclock Wrote: (05-15-2013, 11:07 AM)Slbomber Wrote: Thank you for answer)) Backuped BIOS download link: http://rghost.ru/46020863
And more one question: how do i create UEFI USB recovery disk for BIOS?
Вот твой биос
Here is your Video menu in advanced section
Code: ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0025' ]│
└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Subtitle: 'Video Configuration'
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Special Features' [ VarStore: '0x1e6', QuestionId: '0x92', Help: 'Enable Switch Graphic Function']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Primary Display ' [ VarStore: '0x192', QuestionId: '0xa03', Help: 'Primary Display ']
Option: 'IGFX' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'PEG' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'PCI' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'SG' [ Value: '4' Default: 'true' Type: 'int8' ]
Reference: 'Internal Graphic Device' [ FormID: '0x0250', QuestionId: '0x93', VarStore: '0xffff' ]
Reference: 'Pci Express Graphic' [ FormID: '0x0251', QuestionId: '0x94', VarStore: '0xffff' ]
Reference: 'SA DMI Configuration' [ FormID: '0x0252', QuestionId: '0x95', VarStore: '0xffff' ]
┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0250' ]│
└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Subtitle: 'Internal Graphic Device'
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Internal Graphics Device ' [ VarStore: '0x193', QuestionId: '0xa02', Help: 'Enable IGD ']
Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'RC6 (Render Standby)' [ VarStore: '0x194', QuestionId: '0x96', Help: 'Graphic Render C-State(RC6) is a technique designed to optimize the average power to the graphics render engine during times of idleness of the render engine.']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Deep Render Standby' [ VarStore: '0x20a', QuestionId: '0x97', Help: 'Configure Deep Render Standby']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - Gtt Size' [ VarStore: '0x195', QuestionId: '0xa01', Help: 'Select the Gtt size']
Option: '1 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '2 MB' [ Value: '2' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - Aperture Size' [ VarStore: '0x197', QuestionId: '0xa04', Help: 'Select the Aperture Size ']
Option: '128 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '256 MB' [ Value: '2' Default: 'true' Type: 'int8' ]
Option: '512 MB' [ Value: '3' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - DVMT Pre-Allocated' [ VarStore: '0x198', QuestionId: '0xa00', Help: 'Select DVMT5.0 Pre-Allocated(Fixed) Graphics Memory size used by the Internal Graphics Device.']
Option: '0 MB' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: '32 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '64 MB' [ Value: '2' Default: 'true' Type: 'int8' ]
Option: '96 MB' [ Value: '3' Default: 'false' Type: 'int8' ]
Option: '128 MB' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: '160 MB' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: '192 MB' [ Value: '6' Default: 'false' Type: 'int8' ]
Option: '224 MB' [ Value: '7' Default: 'false' Type: 'int8' ]
Option: '256 MB' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: '288 MB' [ Value: '9' Default: 'false' Type: 'int8' ]
Option: '320 MB' [ Value: '10' Default: 'false' Type: 'int8' ]
Option: '352 MB' [ Value: '11' Default: 'false' Type: 'int8' ]
Option: '384 MB' [ Value: '12' Default: 'false' Type: 'int8' ]
Option: '416 MB' [ Value: '13' Default: 'false' Type: 'int8' ]
Option: '448 MB' [ Value: '14' Default: 'false' Type: 'int8' ]
Option: '480 MB' [ Value: '15' Default: 'false' Type: 'int8' ]
Option: '512 MB' [ Value: '16' Default: 'false' Type: 'int8' ]
Option: '1024 MB' [ Value: '17' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - DVMT Size' [ VarStore: '0x199', QuestionId: '0x98', Help: ' Select the size of DVMT 5.0 that the Internal Graphics Device will use']
Option: '128 MB' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '256 MB' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'MAX' [ Value: '255' Default: 'true' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| Select option: 'IGD - Boot Type' [ VarStore: '0x19a', QuestionId: '0x99', Help: 'Select the Video Device that will be activated during POST']
| Option: 'VBIOS Default' [ Value: '0' Default: 'true' Type: 'int8' ]
| Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
| Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
| Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
| Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
| Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
| Option: 'LFP2' [ Value: '128' Default: 'false' Type: 'int8' ]
└- END IF Suppress;
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| Question [ ID: '0x99' ] == 0x00
| OR expression
└- END IF Suppress;
Select option: 'IGD - Boot Type 2' [ VarStore: '0x19b', QuestionId: '0x9a', Help: 'Select Secondary Display Device']
Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
Option: 'LFP2' [ Value: '128' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| NOT expression
└- END IF Suppress;
Select option: 'IGD - Boot Type' [ VarStore: '0x19a', QuestionId: '0x9b', Help: 'Select the Video Device that will be activated during POST']
Option: 'VBT Default' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
┌- Suppress IF:
| Question [ ID: '0xa3' ] == 0x02
| NOT expression
| Question [ ID: '0x9b' ] == 0x00
| OR expression
└- END IF Suppress;
Select option: 'IGD - Boot Type 2' [ VarStore: '0x19b', QuestionId: '0x9c', Help: 'Select Secondary Display Device']
Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ]
Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'IGD - LCD Panel Type' [ VarStore: '0x19c', QuestionId: '0x9d', Help: 'Select the Panel used by the Internal Graphics Device by selecting the appropriate setup item']
Option: '640x480 LVDS' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: '800x600 LVDS' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: '1024x768 LVDS1' [ Value: '3' Default: 'true' Type: 'int8' ]
Option: '1280x1024 LVDS' [ Value: '4' Default: 'false' Type: 'int8' ]
Option: '1400x1050 LVDS1' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: '1400x1050 LVDS2' [ Value: '6' Default: 'false' Type: 'int8' ]
Option: '1600x1200 LVDS' [ Value: '7' Default: 'false' Type: 'int8' ]
Option: '1366x768 LVDS' [ Value: '8' Default: 'false' Type: 'int8' ]
Option: '1680x1050 LVDS' [ Value: '9' Default: 'false' Type: 'int8' ]
Option: '1920x1200 LVDS' [ Value: '10' Default: 'false' Type: 'int8' ]
Option: '1440x900 LVDS' [ Value: '11' Default: 'false' Type: 'int8' ]
Option: '1600x900 LVDS' [ Value: '12' Default: 'false' Type: 'int8' ]
Option: '1024x768 LVDS2' [ Value: '13' Default: 'false' Type: 'int8' ]
Option: '1280x800 LVDS' [ Value: '14' Default: 'false' Type: 'int8' ]
Option: '1920x1080 LVDS' [ Value: '15' Default: 'false' Type: 'int8' ]
Option: '2048x1536 LVDS' [ Value: '16' Default: 'false' Type: 'int8' ]
Select option: 'Backlight Control' [ VarStore: '0x19d', QuestionId: '0x9e', Help: 'Backlight Control Setting']
Option: 'PWM Inverted' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'PWM Normal' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'GMBUS Inverted' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'GMBUS Normal' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'IGD - TV' [ VarStore: '0x19e', QuestionId: '0x9f', Help: 'Select the TV standard used by the Internal Graphics Device']
Option: 'VBIOS Default' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'NTSC' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'PAL' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'SECAM' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'IGD - Gfx Low Power Mode' [ VarStore: '0x19f', QuestionId: '0xa0', Help: 'This option is applicable for SFF only.']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
Select option: 'Active LFP' [ VarStore: '0x1a0', QuestionId: '0xa1', Help: 'Selects the Active LFP Configuration']
Option: 'No LVDS' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: 'Int-LVDS' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'SDVO LVDS' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'eDP' [ Value: '3' Default: 'false' Type: 'int8' ]
Option: 'VBIOS Default' [ Value: '255' Default: 'true' Type: 'int8' ]
Select option: 'Panel Color Depth' [ VarStore: '0x1a1', QuestionId: '0xa2', Help: 'Select the LFP Panel Color Depth']
Option: '18 Bit' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: '24 Bit' [ Value: '1' Default: 'false' Type: 'int8' ]
┌- Suppress IF:
| EQ == TRUE
| └- END IF Suppress;
┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0251' ]│
└────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Subtitle: 'Pci Express Graphic'
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'PCIE Reset Delay' [ VarStore: '0x33e', QuestionId: '0xa4', Help: 'Delay for PCIE reset. Set to longer time if PEG doesn't work.']
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
Option: '50 ms' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: '100 ms' [ Value: '10' Default: 'true' Type: 'int8' ]
Option: '200 ms' [ Value: '20' Default: 'false' Type: 'int8' ]
Option: '300 ms' [ Value: '30' Default: 'false' Type: 'int8' ]
Select option: 'ASPM' [ VarStore: '0x1a2', QuestionId: '0xa5', Help: 'Control ASPM support for the PEG Device.']
Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ]
Option: 'Auto' [ Value: '4' Default: 'false' Type: 'int8' ]
Select option: 'PEG0 - Gen X' [ VarStore: '0x206', QuestionId: '0xa05', Help: 'Configure PEG0 B0:D1:F0 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'PEG1 - Gen X' [ VarStore: '0x207', QuestionId: '0xa06', Help: 'Configure PEG0 B0:D1:F1 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'PEG2 - Gen X' [ VarStore: '0x208', QuestionId: '0xa07', Help: 'Configure PEG0 B0:D1:F2 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
Select option: 'PEG3 - Gen X' [ VarStore: '0x209', QuestionId: '0xa08', Help: 'Configure PEG0 B0:D6:F0 Gen1-Gen2']
Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ]
Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ]
Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| LIST [ ID: '0xa5' ] in ('0x00','0x02','0x04')
| Select option: ' ASPM L0s' [ VarStore: '0x1a3', QuestionId: '0xa6', Help: 'Enable PCIe ASPM L0s.']
| Option: 'Root Port Only' [ Value: '1' Default: 'false' Type: 'int8' ]
| Option: 'Endpoint Port Only' [ Value: '2' Default: 'false' Type: 'int8' ]
| Option: 'Root&Endpoint Ports' [ Value: '3' Default: 'true' Type: 'int8' ]
└- END IF Suppress;
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| LIST [ ID: '0xa5' ] in ('0x00','0x02','0x04')
| Question [ ID: '0xa6' ] == 0x02
| OR expression
└- END IF Suppress;
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
Select option: 'Always Enable PEG' [ VarStore: '0x196', QuestionId: '0xa7', Help: 'To enable the PEG']
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ]
┌- Grayout IF:
| Question [ ID: '0x0f' ] == 0x02
| Question [ ID: '0x0e' ] == 0x01
| AND expression
└- END IF Grayout;
┌- Suppress IF:
| LIST [ ID: '0xa03' ] in ('0x00','0x01','0x02','0x03')
| Question [ ID: '0x92' ] == 0x00
| OR expression
└- END IF Suppress;
Select option: 'PowerXpress Setting' [ VarStore: '0x1e7', QuestionId: '0xa8', Help: 'Setting Mux or Muxless']
Option: 'Muxless Fixed Scheme Only' [ Value: '5' Default: 'false' Type: 'int8' ]
Option: 'Muxless Dynamic Scheme Only' [ Value: '6' Default: 'false' Type: 'int8' ]
Option: 'Muxless Fixed and Dynamic Scheme' [ Value: '7' Default: 'false' Type: 'int8' ]
Option: 'Full dGPU PowerOff Dynamic Scheme' [ Value: '8' Default: 'true' Type: 'int8' ]
Option: 'Fixed and Full dGPU PowerOff Dynamic [ Value: '13' Default: 'false' Type: 'int8' ]
but in your bios option to disable IGD is missing.
Code: Select option: 'Internal Graphics Device ' [ VarStore: '0x193', QuestionId: '0xa02', Help: 'Enable IGD ']
Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ]
Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ]
you can try to set 0x193 to 0x0, it should be disabled
1. Take USB stick and format to FAT32
2. Create directory structure EFI\Boot
3. Download BOOTX64.EFI
4. Put downloaded file to Boot directory.
5. Restart and enter BIOS setup.
6. Make sure you have following values:
Legacy Support: Disable
Secure Boot: Disable
7. Reboot and press F9 to boot from USB stick
8. Give command:
setup_var 0x193 0x0
9. Reboot and check
10. REPORT RESULT HERE
in case of failure - remove battery from motherboard Спасибо, попробую завтра))Можешь скинуть всю инфу из моего Advanced Menu, думаю пригодится в будующем, сам алгоритм взаимодействия вроде понял))
Thanks you, i try it tomorrow =) Please, give me a full advanced menu info at .txt file)
About results I will report tomorrow) Thanks)
Posts: 64
Threads: 3
Joined: Apr 2013
Reputation:
8
(05-15-2013, 12:02 PM)Slbomber Wrote: Thanks you, i try it tomorrow =) Please, give me a full advanced menu info at .txt file)
About results I will report tomorrow) Thanks)
here we are
http://rghost.ru/46022596
Posts: 9
Threads: 1
Joined: May 2013
Reputation:
0
Oh.... I have a blackscreen((( In restore mode caps lock give 2 signal... There is CMOS battery in notebook?I don't know
Posts: 2
Threads: 1
Joined: May 2013
Reputation:
0
Hi,
I would like to know which settings can be changed in my BIOS? With the j-bios tool I find out, that there are two hidden forms, and I think the "advanced menu" which I really need, becouse my netbook has a nasty ?bug? and the fan is always working at full speed, which can not be changed at all. Maybe the advanced manu section has the answer for that, but I could not access that 
Thank you.
Original, ATD branded BIOS: [attachment=5276]
Malata branded BIOS's got from the manufacturer: [attachment=5277]
"Welcome" BIOS with a bug, it disables the touchpad completely:
ATD PC 1028.ZIP (Size: 1.4 MB / Downloads: 8)
Trying j-bios on the original: [attachment=5278]
Posts: 5
Threads: 2
Joined: Mar 2013
Reputation:
0
HP Envy 17-t 2000 cto 3D
-Bios Revision : 3.5
-Bios Version: F.1C
-Bios Type : Insyde EFI
I need a switchable graphic fixed mode option if possible.
Posts: 64
Threads: 3
Joined: Apr 2013
Reputation:
8
05-16-2013, 11:29 PM
(This post was last modified: 05-16-2013, 11:30 PM by Falseclock.)
(05-16-2013, 01:49 PM)bbb Wrote: Hi,
I would like to know which settings can be changed in my BIOS? With the j-bios tool I find out, that there are two hidden forms, and I think the "advanced menu" which I really need, becouse my netbook has a nasty ?bug? and the fan is always working at full speed, which can not be changed at all. Maybe the advanced manu section has the answer for that, but I could not access that
Thank you.
Original, ATD branded BIOS:
Malata branded BIOS's got from the manufacturer:
"Welcome" BIOS with a bug, it disables the touchpad completely:
Trying j-bios on the original:
your bios is too old. here we dealing with new RSA signed BIOS
(05-16-2013, 02:22 PM)cyber942 Wrote: HP Envy 17-t 2000 cto 3D
-Bios Revision : 3.5
-Bios Version: F.1C
-Bios Type : Insyde EFI
I need a switchable graphic fixed mode option if possible.
without bios download link all such posts will be ignored
Posts: 5
Threads: 2
Joined: Mar 2013
Reputation:
0
(05-16-2013, 11:29 PM)Falseclock Wrote: (05-16-2013, 01:49 PM)bbb Wrote: Hi,
I would like to know which settings can be changed in my BIOS? With the j-bios tool I find out, that there are two hidden forms, and I think the "advanced menu" which I really need, becouse my netbook has a nasty ?bug? and the fan is always working at full speed, which can not be changed at all. Maybe the advanced manu section has the answer for that, but I could not access that
Thank you.
Original, ATD branded BIOS:
Malata branded BIOS's got from the manufacturer:
"Welcome" BIOS with a bug, it disables the touchpad completely:
Trying j-bios on the original:
your bios is too old. here we dealing with new RSA signed BIOS
(05-16-2013, 02:22 PM)cyber942 Wrote: HP Envy 17-t 2000 cto 3D
-Bios Revision : 3.5
-Bios Version: F.1C
-Bios Type : Insyde EFI
I need a switchable graphic fixed mode option if possible.
without bios download link all such posts will be ignored
Sorry i forgot to upload bios yesterday 
http://www.mediafire.com/?vd64mjm9vnx46vq
|
Users browsing this thread: 4 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[Valid RSS]](valid-rss.png "Validate my RSS feed")