Posts: 13
Threads: 0
Joined: Aug 2023
Reputation:
0
10-17-2023, 01:34 PM
(This post was last modified: 10-17-2023, 01:38 PM by VasyaHP2007.)
Does not work.
BIOS flashed, and then my laptop rebooted, then it showed a black screen and rebooted again, and then finally rebooted for the 3rd third time and loaded the operating system normally, but BIOS version remained old (1.50). I breathed a sigh of relief because I thought that my laptop would no longer turn on, but fortunately, I was lucky.
In a little more detail:
BIOS firmware started (started on behalf of the administrator), charging from the laptop was connected, battery charge = 100%;
BIOS started flashing, indicating that BIOS version on the device is "1.50", and the new one is "1.60";
After the firmware, the laptop rebooted and showed a black screen, but the devices were initialized (DVD drive made some noise), and the screen is still black;
Another reboot, this time the initialization of the devices also took place, but the company logo appeared and I was able to enter in BIOS (version 1.50) by pressing the "F2" key;
I rebooted my laptop and after that the operating system booted successfully.
Something like that. Ideas?
I also noticed that in the file "readme.txt " it is said that my laptop does not support this BIOS (1.60), but the firmware still started. It's all strange...