Bios unlock/mod

[baten]

I have been trying to modify this bios, it is off a qnap ts509 motherboard.
it uses intel 945g chipset and only supports cpus upto 1066mhz fsb.

I have updated the microcodes, and have a quadcore coming to test quadcores are working or not, they wasn't before. An e7600 will. original cpu was a Celeron 1.6mhz.

I would like to add overclocking features, for multiplier and fsb, if possible.

it is a 1024kb bios, and can only find 512kb bios elsewhere, so not sure I can just copy parts from one to another, I assume not. i.e. the link arch part from a motherboard with 945g chipset and overclocking.

it has a sort of no entry sign at top of some columns in AMIBCP.
on a side note, on this board there are 2 marvell 88se6145 sata controllers, I obtained a later firmware for these, 1.1.0.L75, hoping it will give >2tb support, some sites like hitachi storage say they are compatible, on this board they are not. however the flash is write protected, never seen that before, any ideas how to unwrite protect it? it isn't an option rom in the bios, that's for the intel vga.

many thanks

[baten]

Anyone?

[qnapper]

I have been trying to modify this bios, it is off a qnap ts509 motherboard.
it uses intel 945g chipset and only supports cpus upto 1066mhz fsb.

I have updated the microcodes, and have a quadcore coming to test quadcores are working or not, they wasn't before. An e7600 will. original cpu was a Celeron 1.6mhz.

I would like to add overclocking features, for multiplier and fsb, if possible.

it is a 1024kb bios, and can only find 512kb bios elsewhere, so not sure I can just copy parts from one to another, I assume not. i.e. the link arch part from a motherboard with 945g chipset and overclocking.

it has a sort of no entry sign at top of some columns in AMIBCP.
on a side note, on this board there are 2 marvell 88se6145 sata controllers, I obtained a later firmware for these, 1.1.0.L75, hoping it will give >2tb support, some sites like hitachi storage say they are compatible, on this board they are not.  however the flash is write protected, never seen that before, any ideas how to unwrite protect it? it isn't an option rom in the bios, that's for the intel vga.

many thanks

Is this the original untouched BIOS for the TS 509?