Acer Aspire V3-772G variables for setup_var decompiled

[felipejfc]

Both of you, backup with this tool

http://dl.felipejfc.com/bios%20mods/NEW_BACKUP_FPTs.exe

run as admin, upload result.rar

I tried running this, and it got as far as "Please Wait...", waited a few seconds, then quit after a brief message of "( was unexpected at this time." with no result.rar anywhere.

Try this

http://rghost.net/52673110

read this

http://www.bios-mods.com/forum/Thread-Ac...1#pid66401

[Hapi-San]

Try this

http://rghost.net/52673110

read this

http://www.bios-mods.com/forum/Thread-Ac...1#pid66401

That was what I posted in my first post. However, I have since made a few little changes in my bios so I am reuploading the file..

I tried "FPTw64 -d biosbackup.bin" and got "Error 26: The host CPU does not have read access to the target flash area. To enable read access for this operation you must modify the descriptor settings to give host access to this region", but "FPTw64 -d biosbackup.bin -bios" gives me the biosbackup.bin file at http://rghost.net/53346836.

[felipejfc]

I assume you want advanced menux unlocked right?

Here you go:

http://dl.felipejfc.com/bios%20mods/menu...IPEJFC.zip

Report.

[Hapi-San]

I assume you want advanced menux unlocked right?

Here you go:

http://dl.felipejfc.com/bios%20mods/menu...IPEJFC.zip

Report.

I did indeed. It worked perfectly, thanks very much for the help.

[Honu]

Hi Felipe,

Thanks for helping people unlocking their Bios Menus...
I've done a backup with the "fptw.exe -d AcerBios13.bin -bios" command and got my bios backup : http://rghost.net/53441934
Could you unlock menu in it for me ?
What tool are you using and what are you doing to enable hidden menus ? (MMTool.exe ?)

Thankkkkss,

[felipejfc]

Hi Felipe,

Thanks for helping people unlocking their Bios Menus...
I've done a backup with the "fptw.exe -d AcerBios13.bin -bios" command and got my bios backup : http://rghost.net/53441934
Could you unlock menu in it for me ?
What tool are you using and what are you doing to enable hidden menus ? (MMTool.exe ?)

Thankkkkss,

No MMTool is not for insyde, I use only UEFITool and IDA
http://dl.felipejfc.com/bios%20mods/menu...EJFC_2.zip

Report

[Honu]

No MMTool is not for insyde, I use only UEFITool and IDA
http://dl.felipejfc.com/bios%20mods/menu...EJFC_2.zip

Report

Woooo you're fast ...
I've trying booting in legacy mode, secure mode disabled, using your Flash.bat gave me :

Error 103: There are no supported SPI flash devices installed. Please check connectivity and orientation of SPI flash device.

[felipejfc]

not good, I don't know the problem since I used same procedure as the other guy who has same machine as you...

[Honu]

I did indeed. It worked perfectly, thanks very much for the help.

Hi Hapi-San,

Could you please explain to me how you flash your bios .. ?
What settings did you use in the bios ... UEFI, Legacy ? My Pc do not boot on the USB key when in UEFI mode but will in Legacy mode...

Thanks,

[BDMaster]

I did indeed. It worked perfectly, thanks very much for the help.

Hi Hapi-San,

Could you please explain to me how you flash your bios .. ?
What settings did you use in the bios ... UEFI, Legacy ? My Pc do not boot on the USB key when in UEFI mode but will in Legacy mode...

Thanks,

Error 103: There are no supported SPI flash devices installed
Many times this error is solved changing fparts.txt Eeprom definitions file.
Add these definitions to yours fparts file :

W25Q16BV, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
MX25L3205D, 0xC22016, 0x2000000, 0x1000, 0x20, 64, 0, 0x60, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0x60, 80000
Try and let me know !
Regards