(05-11-2014, 07:52 PM)war Wrote: after unpacking, when i execute insydeflash.exe it throws up the error:
the version of ROM file is the same as that of BIOS.
i think we need to bump up the version number in order to flash rom....
do i need to install windows 7 compulsory ?
You have to modify platform.ini file :
Flag=1 to 0 !!!!!
[Bios_Version_Check]
Flag=1
CheckByBios=0
CheckByBiosErrorMessage="This BIOS file is not allow to flash. The flash process will be terminated."
;This flag is the switch of checking BIOS version.
;Flag default : 2.
; 0 : Don't check rom file version.
; 1 : Check BIOS version.
; When rom file version is older then BIOS, it will display
; a warning message and close application.
; 2 : Depend on BIOS report.
;CheckByBios default : 0.
; 0 : Normal process.
; 1 : It will pass version by IHISI 45h to BIOS and check by BIOS.
; When BIOS return not allow to flash, it will be terminated the process.
; When BIOS allow to flash, it will go ahead and do it's normal process.
; When this flag is enable but BIOS not support, it will skip version check and assume allow to flash.
;CheckByBiosErrorMessage
; default : "This BIOS file is not allow to flash. The flash process will be terminated."
; String : User defined error message when BIOS is not allow to flash this version image.