[REQUEST] Lenovo Ideadpad N581 Whitelist removal

[nillebor]

works this automod for me?

backup - works
patch - works
flash - don't work, fault code is: "Error 104: The 2 SPI flash devices do not have compatible command sets"

i change this in fparts.txt, but found devices are: W25Q32BV and EN25QH16, last is 0x60, must i change this in 0xc7?

where is my mistake?
to the backup really 4.5 MB have? original is about 6 MB ...

a tip from the professionals would not be bad

thank you

[nillebor]

YES - it works, with help from BDMaster and Boardsearch

you find progs, patchfile and howto here (you Need http://rghost.net/56830811, http://rghost.net/56870196, http://rghost.net/56795507 and http://rghost.net/56932575
you must edit Fparts.txt (included in Mod FTP 8.1) , read this

i must edit
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0xc7, 80000 and
EN25QH16, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000

even if no one has replied, I'm still on my success kekommen and hope it helps one more!

super work especially for BDMaster his endurance in the forum, helped me a lot

see you back someday, keep it up!
have a nice day, i must order a new Card

[BDMaster]

Please close, here it goes to the correct forum

sorry, I'll be better

Hi friend,
I want to start a New Way to pass Mods to users :

AutoMod

Using CodeRush Tool UEFIPatch + Patches.txt We can do the Mod by ourself, in any time and wherever We are !!!

Just use the right Patches.txt for the own Bios Version, so for 5ECN96WW use this one !!!

How to use ? It's easy, just do a biosbackup.bin file and drag&drop on UEFIPatch.exe (the Patches.txt file has to be togheter at tool) It will reply with a file patched, then rename that file as bios.bin, put It into modified folder where are all rest tools to re-flash Bios Mod and copy all files from modified folder to an USB Dos Formatted Bootable Stick and Boot from USB !
Then at CLI Prompt Comand run flash.bat That's It all !

Here CodeRush Tool :

https://www.sendspace.com/file/1745gw

The Patches.txt file for 5ECN96WW :

http://rghost.net/57810591

Here Modified folder with all tools to re-flash Bios Mod from USB, follow instructions :

http://rghost.net/56795507

I hope It will become the New Mod Way !!!

Let me know
regards

P.S. if You get error 104 on FPT process find Fparts.txt Eeprom Definitions File into FPT 8.1 folder and do some modifies
on your Eeprom row E.G. :
if your Eeproms Chips are W25Q16BV - W25Q32BV :

check fparts.txt file in modified folder open It and look these rows

W25Q16BV, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0xc7, 80000

change 0xc7 in 0x60 or otherwise 0xc60 in 0xc7 and save then try again to flash !

W25Q16BV, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0x60, 80000

Any laptop has a Eeprom sets different and We have to chancge the configuration.

[BDMaster]

You are awesome friend !!!
I replied lately I am sorry !!!
Regards


Hi friend,
I want to start a New Way to pass Mods to users :

AutoMod

Using CodeRush Tool UEFIPatch + Patches.txt We can do the Mod by ourself, in any time and wherever We are !!!

Just use the right Patches.txt for the own Bios Version, so for 5ECN96WW use this one !!!

How to use ? It's easy, just do a biosbackup.bin file and drag&drop on UEFIPatch.exe (the Patches.txt file has to be togheter at tool) It will reply with a file patched, then rename that file as bios.bin, put It into modified folder where are all rest tools to re-flash Bios Mod and copy all files from modified folder to an USB Dos Formatted Bootable Stick and Boot from USB !
Then at CLI Prompt Comand run flash.bat That's It all !

Here CodeRush Tool :

https://www.sendspace.com/file/1745gw

The Patches.txt file for 5ECN96WW :

http://rghost.net/57810591

Here Modified folder with all tools to re-flash Bios Mod from USB, follow instructions :

http://rghost.net/56795507

I hope It will become the New Mod Way !!!

Let me know
regards

P.S. if You get error 104 on FPT process find Fparts.txt Eeprom Definitions File into FPT 8.1 folder and do some modifies
on your Eeprom row E.G. :
if your Eeproms Chips are W25Q16BV - W25Q32BV :

check fparts.txt file in modified folder open It and look these rows

W25Q16BV, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0xc7, 80000

change 0xc7 in 0x60 or otherwise 0xc60 in 0xc7 and save then try again to flash !

W25Q16BV, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0x60, 80000

Any laptop has a Eeprom sets different and We have to chancge the configuration.

[nillebor]

thanks for reply

i order by amazon ac-Card and test ist!
the patch file are the same form the g580 but i Need patch for wlan
in the file from n581 is enable "Setuputility" is the advance Settings from bios oder need it for wlan whitelis?
in ohner thread fo g580 ist only activated "UEFIL05BIOSLock" is this right?

for Flash, i must Change:
EN25QH16, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
to
EN25QH16, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000

flashing ok, and im happy, i order new Card and test it next days...

regards and sorry for my english
nille

[BDMaster]

thanks for reply

i order by amazon ac-Card and test ist!
the patch file are the same form the g580 but i Need patch for wlan
in the file from n581 is enable "Setuputility" is the advance Settings from bios oder need it for wlan whitelis?
in ohner thread fo g580 ist only activated "UEFIL05BIOSLock" is this right?

for Flash, i must Change:
EN25QH16, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
to
EN25QH16, 0xEF4015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000

flashing ok, and im happy, i order new Card and test it next days...

regards and sorry for my english
nille

Yes G580 = N581
It's for WWan + WPan + Setuputility :

# UEFIL05BIOSLock | Whitelist | 75=EB
11D378C2-B472-412F-AD87-1BE4CD8B33A6 10 O:0322:EB17 O:0360:EB18 O:037C:EB10

# OemNvsDriverDXE | Whitelist | 1A-E3-04-E3=00
4082D1D0-1744-4EE3-803E-B8EE3F07B2FE 10 O:0F11:7D00 O:0F13:EB00 O:0FE4:7D00 O:0FE6:EB00

# Setuputility | Whitelist | A6-94-8C-86-80=00
FE3542FE-C1D3-4EF8-657C-8048606FF670 10 O:09DD:7C00 O:09EF:7400 O:09F7:7400 O:09FD:7400 O:0A03:7400

In others words All Unlocked !!!
Regards

[nillebor]

nice

I've understood correctly,
i have ordered the intel 7260.HMWWB, this will come in the next few days ...
I'm testing wlan and bluetooth, maybe must taped pin 51 for enabled Bluetooth - we will see and i report this here

thanks for the help

[nillebor]

short info - new wlan card (intel 7260) works perfectly, big thanks to bdmaster for his work and support

but i have a small question for understand me,
create the bios backup toolkit same as BACKUP_TEST_ALL or FPTs unless a different name?
BACKUP_TEST_ALL or FPTs create a *.bin file and bios backup toolkit a *.rom

it's the same and can rename it and patch or Flash it? filesize is equal...
I would be happy if you'd answer the short me

please keep it up!

thx nillebor

[simonh]

Can anyone please help me with BIOS whitelist on a ideapad N581
I'd like to modify the bios to allow any network card change. I read trough the forum pretty much everything but still have not figured everything
I did a backup of my bios with NEW_BACKUP_FPTs but I'm unsure if it worked since I have some errors warning in the info.txt file
here is the complete result
http://rghost.net/58252280
can anyone please modify it for me or post back the Patches.txt file for 5ECN96WW (N580 = N581)
so I can try it myself...?
Thanks!

[BDMaster]

Can anyone please help me with BIOS whitelist on a ideapad N581
I'd like to modify the bios to allow any network card change. I read trough the forum pretty much everything but still have not figured everything
I did a backup of my bios with NEW_BACKUP_FPTs but I'm unsure if it worked since I have some errors warning in the info.txt file
here is the complete result
http://rghost.net/58252280
can anyone please modify it for me or post back the Patches.txt file for 5ECN96WW (N580 = N581)
so I can try it myself...?
Thanks!

Here You go :

http://rghost.net/58253948

http://rghost.net/58254018

let me know
Regards