Welcome
|
You have to register before you can post on our site.
|
|
[REQUEST] Lenovo Y50-70 (9ECNxxWW) Whitelist Removal
|
Posts: 7
Threads: 0
Joined: Sep 2014
Reputation:
0
(09-23-2014, 03:31 PM)BDMaster Wrote: (09-23-2014, 09:28 AM)hdneo Wrote: hi BDMASTER,
please unlock bios of lenevo y50 for overvolting vbios to overclock 860m
thanks.
Ok friend,
use these tools run them as Administrator and upload here the results files :
http://rghost.net/57069912
http://rghost.net/53128665
I will try to replace your Signicant Data into Original Bios Generalized, clearing all Eeprom extra data.
Let me know
Regards
(09-23-2014, 08:49 AM)ghostmayer Wrote: . . . Thank you all for your help and time...
Hi friend,
here is your Bios Mod :
http://rghost.net/58172953
let me know
Regards
Thank you alot BDMaster.
I owe you.
What can I do for you for a pay back ?
ps: another pal asked for a bios cvoltage and etc. settings unlock..
can that work on my bios too ?
Posts: 21
Threads: 0
Joined: Sep 2014
Reputation:
0
(09-24-2014, 04:36 PM)BDMaster Wrote: (09-24-2014, 01:59 PM)hdneo Wrote: (09-24-2014, 11:40 AM)BDMaster Wrote: (09-24-2014, 09:52 AM)hdneo Wrote: [
Hi friend,
here is your Bios Mod :
http://rghost.net/58185377
let me know
Regards
Hello, i program bios but first show the error and then show the message "press key to continue" after i press enter key the bios programmed successfulry, then i reset my laptop. but nothing changes. with nvidia inspector the core freq. lock at +135 mhz and i change core voltage but nothing occur on core voltage and core freq, please help bdmaster.
i found another issue, my laptop overheat during gaming and suddenly turn off, is it possibe to back to original bios?
thanks.
Yes just rename your Bios Backup like Bios Mod name and replace into folder where are files to transfer into USB used to flash Bios or replace directly into USB, then do again the same procedure You have done to flash Bios Mod.
Let me know
Regards
please unlock vcore of 860m for overvolting and unlock advanced hidden menu.
thanks a lot.
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
09-25-2014, 05:15 AM
(This post was last modified: 09-25-2014, 08:04 AM by BDMaster.)
(09-25-2014, 04:07 AM)hdneo Wrote: (09-24-2014, 04:36 PM)BDMaster Wrote: (09-24-2014, 01:59 PM)hdneo Wrote: (09-24-2014, 11:40 AM)BDMaster Wrote: (09-24-2014, 09:52 AM)hdneo Wrote: [
Hi friend,
here is your Bios Mod :
http://rghost.net/58198218
let me know
Regards
Hello, i program bios but first show the error and then show the message "press key to continue" after i press enter key the bios programmed successfulry, then i reset my laptop. but nothing changes. with nvidia inspector the core freq. lock at +135 mhz and i change core voltage but nothing occur on core voltage and core freq, please help bdmaster.
i found another issue, my laptop overheat during gaming and suddenly turn off, is it possibe to back to original bios?
thanks.
Yes just rename your Bios Backup like Bios Mod name and replace into folder where are files to transfer into USB used to flash Bios or replace directly into USB, then do again the same procedure You have done to flash Bios Mod.
Let me know
Regards
please unlock vcore of 860m for overvolting and unlock advanced hidden menu.
thanks a lot.
Hi friend,
this is the Menu Tabs Unlock Mod :
Setuputility Menu Tabs Unlock Mod :
FE3542FE-C1D3-4EF8-657C-8048606FF670_946.ROM Setuputility
0A19 : 7C A6 to 7C 00 jl short loc_1800009C1 to jl $+2
0A2B : 74 94 to 74 00 jz short loc_1800009C1 to jz $+2
0A33 : 74 8C to 74 00 jz short loc_1800009C1 to jz $+2
0A39 : 74 86 to 74 00 jz short loc_1800009C1 to jz $+2
0A3F : 74 80 to 74 00 jz short loc_1800009C1 to jz $+2
Here is your Bios Mod :
http://rghost.net/58198218
About Overclocking and overvolting the best place is TechInferno and Svl7 is best Modder, so PM to him about your requests.
Let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 7
Threads: 0
Joined: Sep 2014
Reputation:
0
Dear BDMaster,
I think I lost in conversation.
I would like to know if my bios have any"hidden menus"
suitable for overcloking.
Such as "core voltage settings, etc"
if there is, how can I reach them ?
PS: You didnt answer me for how to pay my debt for the previous issue..
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
(09-25-2014, 06:32 AM)ghostmayer Wrote: Dear BDMaster,
I think I lost in conversation.
I would like to know if my bios have any"hidden menus"
suitable for overcloking.
Such as "core voltage settings, etc"
if there is, how can I reach them ?
PS: You didnt answer me for how to pay my debt for the previous issue..
Hi friend,
here is your Bios Mod NWL Menu Tabs Unlock too :
http://rghost.net/58198508
and here the AutoMod Patch :
http://rghost.net/58198516
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 21
Threads: 0
Joined: Sep 2014
Reputation:
0
(09-25-2014, 05:15 AM)BDMaster Wrote: (09-25-2014, 04:07 AM)hdneo Wrote: (09-24-2014, 04:36 PM)BDMaster Wrote: (09-24-2014, 01:59 PM)hdneo Wrote: (09-24-2014, 11:40 AM)BDMaster Wrote: Hi friend,
here is your Bios Mod :
http://rghost.net/58198218
let me know
Regards
Hello, i program bios but first show the error and then show the message "press key to continue" after i press enter key the bios programmed successfulry, then i reset my laptop. but nothing changes. with nvidia inspector the core freq. lock at +135 mhz and i change core voltage but nothing occur on core voltage and core freq, please help bdmaster.
i found another issue, my laptop overheat during gaming and suddenly turn off, is it possibe to back to original bios?
thanks.
Yes just rename your Bios Backup like Bios Mod name and replace into folder where are files to transfer into USB used to flash Bios or replace directly into USB, then do again the same procedure You have done to flash Bios Mod.
Let me know
Regards
please unlock vcore of 860m for overvolting and unlock advanced hidden menu.
thanks a lot.
Hi friend,
this is the Menu Tabs Unlock Mod :
Setuputility Menu Tabs Unlock Mod :
FE3542FE-C1D3-4EF8-657C-8048606FF670_946.ROM Setuputility
0A19 : 7C A6 to 7C 00 jl short loc_1800009C1 to jl $+2
0A2B : 74 94 to 74 00 jz short loc_1800009C1 to jz $+2
0A33 : 74 8C to 74 00 jz short loc_1800009C1 to jz $+2
0A39 : 74 86 to 74 00 jz short loc_1800009C1 to jz $+2
0A3F : 74 80 to 74 00 jz short loc_1800009C1 to jz $+2
Here is your Bios Mod :
http://rghost.net/58198218
About Overclocking and overvolting the best place is TechInferno and Svl7 is best Modder, so PM to him about your requests.
Let me know
Regards
i programmed the bios, then i change some parameters in overclocking extreme menu, then my laptop has been damaged. when turn on nothing show on display and keyboard baklit is on and nothing occur, please help to recovery the bios
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
Ok friend,
first try to reset CMOS :
http://support.lenovo.com/us/en/documents/migr-45385
Then can try the Recovery Bios Procedure using this file :
http://rghost.net/58206667
Insyde Recovery Procedure :
- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
(In your case may be Fn+R or Fn+f or Fn+B or Win+B key as Lenovo)
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off
The bios should be updated with the modified BIOS, and boot as per normal.
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 2
Threads: 0
Joined: Sep 2014
Reputation:
0
(09-25-2014, 04:23 PM)BDMaster Wrote: Ok friend,
first try to reset CMOS :
http://support.lenovo.com/us/en/documents/migr-45385
Then can try the Recovery Bios Procedure using this file :
http://rghost.net/58206667
Insyde Recovery Procedure :
- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
(In your case may be Fn+R or Fn+f or Fn+B or Win+B key as Lenovo)
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off
The bios should be updated with the modified BIOS, and boot as per normal.
Hi thanks for this, i have simular troubles and have already tried these steps.
I used your automod on my own bios successfully. And In the bios i tried a -25mv undervolt to save some heat. Unfortionatly now all i get is a black screen (no POST). I expected to be able to clear the CMOS but even after 4 hours with battery and cmos battery detached it does not seem to take effect.
When doing these steps mentioned above the fans ramp up to 100% (both fn r and fn b respond) but the usbstick does not power up (usb led flashes once when power on and then continues off, this particular usbstick led always stays on and flashes when active) its a 256meg formatted FAT.
Is it a brick? :'( please help!
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
Hi friend,
I generally don't want Unlock Completely Bios as I saw too much laptop bricked and I wrote into instructions to avoid some kind extreme settings as new laptops are saving some parameters into an Eeprom like that for CMOS near the Bios Eeprom and It's not possible to clear easy, many times these parameters are saved into Bios Eeprom too !!!
So You got a brick and atthe end only a SPI External USB Programmer with a POMONA Soic Clip and a Bios Backup can solve this situation.
Look here :
https://www.bios-mods.com/forum/Thread-R...5#pid74575
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 7
Threads: 0
Joined: Sep 2014
Reputation:
0
Dear BDMaster,
Thank you for your help and time.
You are great.....
|
Users browsing this thread: 13 Guest(s)
|