[REQUEST] Packard Bell TE69KB bios unlock

[BDMaster]

Hello, thank you for you help so far, sorry it wont work anymore, and no, i dont have an SPI programmer.
arent there any key combination you can press to make it possible to make other changes to the laptop? right now i cant even change the HDD, how do a service technichan do if the HDD breaks down?:/
[/quote]

I will upload here a Recovery File to try the Recovery Procedure (but I remember It didn't work in a previous case).
Download and unpack this file You'll get a Bios File EA40KBX64.fd then format as Fat32 an USB Stick to use for Recovery Mode, copy this file into and follow this Procedure :

http://www.sendspace.com/file/ygpz0z

Performing the emergency flash:

- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off

The bios should be updated with the modified BIOS, and boot as per normal.

Regards

[Freddy-FAN]

will that allow me to enter the advanced menus?

and if i want to reverse it i just put the "real" bios on another stick? incase the modified one dont work?

[BDMaster]

This is the original one, I want to look if It works, then I will upload the
modded one as if original don't flash Eeprom the modded is useless !
Let me know
Regards

Your Recovery File Modded Menu Tabs Unlocked here :

http://www.sendspace.com/file/0d00mm

Let me know
Regards

[Freddy-FAN]

allright, after work i just run into the local supply store and buy a usb stick

edit: is there a risk of bricking the laptop? its a 299€ laptop so the money isnt the biggest problem here, its just the annoyaince of ruin it:p

cant perform emergency flash, tried with the first one you linked and the one i've have upgraded to, nothing seems to work, any ideas?:/

[BDMaster]

allright, after work i just run into the local supply store and buy a usb stick

edit: is there a risk of bricking the laptop? its a 299€ laptop so the money isnt the biggest problem here, its just the annoyaince of ruin it:p

Rarely in Recovery Mode laptops bricked !
Regards

[gez75]

I need a Bios unlock for my system, so here's the specs:

Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_gdr.140723-2018)
Language: English (Regional Setting: English)
System Manufacturer: Packard Bell
System Model: EasyNote TE69KB
BIOS: V2.09
Processor: AMD E2-3800 APU with Radeon™ HD Graphics (4 CPUs), ~1.3GHz
Memory: 3526MB RAM
Available OS Memory: 3526MB RAM
Page File: 4742MB used, 2369MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit Unicode

I'd be really thankful if someone had one so I can replace my OS back to Windows 7!!!

[BDMaster]

I need a Bios unlock for my system, so here's the specs:

Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_gdr.140723-2018)
Language: English (Regional Setting: English)
System Manufacturer: Packard Bell
System Model: EasyNote TE69KB
BIOS: V2.09
Processor: AMD E2-3800 APU with Radeon™ HD Graphics (4 CPUs), ~1.3GHz
Memory: 3526MB RAM
Available OS Memory: 3526MB RAM
Page File: 4742MB used, 2369MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit Unicode

I'd be really thankful if someone had one so I can replace my OS back to Windows 7!!!

Hi friend,
your Laptop has an AMD CPU so We cannot use Intel FPT or a DOS tool to reflash Bios Mod as We need to use Svl7 tool (prr.exe) too to un-protect Eeprom !!!
So only way to reflash It is an SPI External USB HW Programmer !!!
Look here :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

EA40KBX64.fd

SLIC header found in 7E374E25-8E01-4FEE-87F2-390C23C606CD_1060.ROM at 0
Pubkey found in 1A1E2341-A2FB-42C7-8D17-3073D08EB21D_1527.ROM at 0
Pubkey found in 4CAC73B1-7C53-4DC1-B6FA-42A15260409A_1837.ROM at 0
Marker found in DD6569A7-E455-4EE5-B2BA-ECDA84ACBC99_1533.ROM at 0
Marker found in F306F460-2DC9-4B5D-9410-83585F1ADD80_1843.ROM at 0
'SLIC' string found in 608FBD1D-15E1-40C4-9443-662ECC0C07AA_1223.ROM at 667
'SLIC' string found in AFC04099-0D39-405D-BE46-846F08C51A31_1069.ROM at 5F7
'SLIC' string found in AFC04099-0D39-405D-BE46-846F08C51A31_1069.ROM at 116E
OEM/Table IDs identified are:
1. INSYDEH2O BIOS
2. INSYDEINSYDE00
3. ACRSYSACRPRDCT
Header (INSYDEH2O BIOS ACPI) (x1)
Pubkey (x2)
Marker (2.1) (INSYDEINSYDE00) (x1)
Marker (2.1) (ACRSYSACRPRDCT) (x1)

SetupUtility Mod :
FE3542FE-C1D3-4EF8-657C-8048606FF670_392.ROM

Form Sets
--------------------------------------------------------------------------------
Offset: Title:
--------------------------------------------------------------------------------
0x29134 Boot (0x102)
0x298F4 Security (0xE7)
0x29E24 Main (0xC0)
0x2A544 Power (0x1F8)
0x2AC24 Advanced (0x15E)
0x2DB54 Exit (0x12F)
0x2DD24 Information (0x2)

01775 : 0F 84 D6 00 00 00 to 0F 84 00 00 00 00 jz loc_180001851 to jz $+6 ; Power
017A9 : 0F 84 A2 00 00 00 to 0F 84 00 00 00 00 jz loc_180001851 to jz $+6 ; Advanced

I have done just v.2.05 some time ago and v.2.09 is the same about Slic Modules and SetupUtility Module so It's easy.
If do You want to try Bios Mod flashing in Recovery Mode here is :

https://www.sendspace.com/file/d9sp0d

Recovery Procedure :

- Performing the emergency flash:

- Format an USB Fat32 Dos Mode
- Copy Bios File EA40KBX64.fd into USB root
- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off

The bios should be updated with the modified BIOS, and boot as per normal.

Let me know
Regards

[gez75]

Thanks for the info, il get onto it right away, im gunna have to review this a few times though

---

Im really sorry, none of that makes any sense above the recovery procedure part, can I just ignore that and just attempt the recovery procedure? that I can do haha!
im just wondering if I can use any sort of memory stick? a quick google search shoes me how to do the format, so im guessing I can use any kind external memory storage device.
Advisory needed

---

Ow and one last thing, what are the chances of something going wrong, which supposedly it wont, but if does will the flash return back to before I attempted the flash or am I completely stuffed if it is?

[BDMaster]

Ok friend,
Recovery Procedure is developed to permit users to Recover their laptops if something goes wrong
during a Bios Update so if there isn't a power break or interruption flashing process all have to go well !!!
But may be that Recovery Process is disabling on your Bios and It doesn't work !
So only trying You can know It
Regards

[gez75]

Aha, okay will give it a go once I get hands on spare USB
many thanks!!