(11-17-2014, 11:59 AM)han Wrote: OK I hope i can explan it better, sorry for my English I am a German Speaker....
I have a Thinkpad X220 with Windows 7 so it have a SLIC 2.1 in BIOS and I patch the Whitelist with this File from her https://www.bios-mods.com/forum/Thread-R...st-Removal. Thats works Fine.
Now I buy a secound ThinkPad X220 without Windows 7 from eBay. Ther is no SLIC 2.1 in BIOS the SLIC ToolKit say no slic/Dump. Sreenshot will be get tomorrow.
I will Patch the BIOS with a SLIC 2.1 Table and the Whitlist Removal. But the Whitlist Removal is not so importet because I can buy the Lenovo WANN-Cart so is not so bad if ther is no Whitlist Removal.
I Prepar the original BIOS File (1.39) from Lenovo with Phoenix tool 256 but after I Flash the BIOS no SLIC tabel found with the SLIC ToolKit. Than I prepar the BIOS File from the Whitlist-Removal (hier the File on DropBox https://dl.dropboxusercontent.com/u/2301...ied_WL.exe) with the Phoenix tool and flash the BIOS File. After that no SLIC Table found with the SLIC ToolKit. I Don't know what to do.
RW-File from the Thinkpad see Post one
Thank you for your Help!
Ok friend,
I make a sumary so You can say that I understood You :
1. two Laptop ThinkPad X220 1st with Slic 2nd with NO slic
2. Firmware 1.39 Serg008 NWL for 1st Laptop with Slic + NWL
We will get 2nd Laptop with Slic + NWL like 1st ! It's right ?
So You have to make Bios Backup on Both Laptop (be sure You have same Bios version on both = 1.39)
use FPT tool or this one and runIt as Admin :
http://rghost.net/58219938
Then use RW-Anything and make RW-dump :
http://forums.mydigitallife.info/threads...atest-News
Make a SLIC Dump too ( if You use BACKUP_Tools.exe It will do all these operations) using Slic Dump Toolkit :
http://forums.mydigitallife.info/threads...rt-Backup)
Then Upload all here for me and I will prepare a Generalized Bios Slic 2.1 + NWL for You.
I think that It's missing Table Module and Others so We have to add them into Bios !
You used Serg008 Bios that is Generalized NWL, but It not adds Slic as It is standard (No Sliced by Lenovo)
as Bios Sliced is wrote by manufacturer and include Modules whichs are wrote into Eeprom and into NVRAM,
so It will stay there forever even also You make new Upgrade, so modifying Serg008 not will adds Slic !
Unless You use PMT and add these modules missing using kinds options.
I got a Bios version Slic 2.1 (Module added), but I prefer use your Bios backup to get It and give a perfect !
Let me know
Regards