Lenovo B590 (H1ET85WW) AES-NI Unlock

[LosSantosPro]

Mhh...its gonna take a couple more minutes.
I´m currently createing a dos startup disk with HP usb format tool.
Its performing a normal format on my 32 gb stick ;(
Is it even right following this tutorial: https://www.bios-mods.com/forum/Thread-H...GINAL-BIOS
but than copy your files onto the usb stick instead of the ones suggested in the tutorial and then run flash.bat inside the dos system?

Use Rufus: http://www.howtogeek.com/136987/how-to-c...usb-drive/

But instead of using FreeDOS, use MS-DOS

[scoddly]

Hey

I booted into dos but it couldnt flash the bios:
[img][/img]

Also look at the amount of bytes. The original seems to have 8 mb and the modifyed 4mb.

best regards
scoddly

[LosSantosPro]

Hey

I booted into dos but it couldnt flash the bios:
[img][/img]

Also look at the amount of bytes. The original seems to have 8 mb and the modifyed 4mb.

best regards
scoddly

Hi, had to modify fparts.txt

try the attached file

Dont worry if still error 104, i can change fparts again

Edit: Forgot to mention, bios mod is supposed to be 4mb

your laptop has 2 bios chips

8mb and 4mb

[scoddly]

Hey, :D

It Worked!!!!
[img]http://s30.postimg.org/fckjsi4s1/DSC_0641.jpg
[/img]

Thanks a lot!

I will take a look at the tools you posted and try figure out if i can enable aes-ni!
but tonight its just too late (5am) to do any further work at all.
Ill work my way through it tomorrow.
Thanks again for your work!

Let me know (via pm) if i can transfer you a donation.

Best regards
scoddly

[LosSantosPro]

Hey,

It Worked!!!!
[img]http://s30.postimg.org/fckjsi4s1/DSC_0641.jpg
[/img]

Thanks a lot!

I will take a look at the tools you posted and try figure out if i can enable aes-ni!
but tonight its just too late (5am) to do any further work at all.
Ill work my way through it tomorrow.
Thanks again for your work!

Let me know (via pm) if i can transfer you a donation.

Best regards
scoddly

I'm glad it worked for you, im sorry but i couldnt find any "aes-ni" in your BIOS, ill have a look at other modules on your BIOS later for it as its 4am here, ill PM you.

Thank you

[LosSantosPro]

UPDATE!!!


I have managed to add AES-NI Support!!!

I will attach here and PM you

https://www.sendspace.com/file/z3ola5

[scoddly]

UPDATE!!!


I have managed to add AES-NI Support!!!

I will attach here and PM you

https://www.sendspace.com/file/z3ola5

Good morning LosSantos ;)

Wow you are fast! Sadly this one didnt work. I think the flash failed:


Pay attention to the amount of flashed bytes.

another possibility could be:
"hardware encryption can be blocked in several places"
[https://www.bios-mods.com/forum/Thread-R...ock?page=2]

Thanks a lot!
best regards
scoddly

[LosSantosPro]

UPDATE!!!


I have managed to add AES-NI Support!!!

I will attach here and PM you

https://www.sendspace.com/file/z3ola5

Good morning LosSantos

Wow you are fast! Sadly this one didnt work. I think the flash failed:


Pay attention to the amount of flashed bytes.

another possibility could be:
"hardware encryption can be blocked in several places"
[https://www.bios-mods.com/forum/Thread-R...ock?page=2]

Thanks a lot!
best regards
scoddly

Ahh when I did the same proccess on my Z580 it worked, i now have AES-NI according to CPU-Z - could you do me another favour and post another bios dump after flashing the aes-ni? https://app.box.com/s/y2q3dc4eic4veho02m5m

I will then be able to check if my aes-ni mod is on your bios chip

Kind Regards

[scoddly]

Hey,

Did it:
https://mega.co.nz/#!4NQW1BLB!XTCAxpz2VY...Rr605AcFTY

greetings
scoddly

[LosSantosPro]

Hey,

Did it:
https://mega.co.nz/#!4NQW1BLB!XTCAxpz2VY...Rr605AcFTY

greetings
scoddly

Hi, I checked your BIOS dump, my AES-NI mod was NOT there, You may have flashed wrong image.

Please try again with BIOS attached below

Kind Regards