(12-06-2014, 05:07 PM)WickedMaster Wrote: Secureboot was enabled. I disabled and set Legacy BIOS.
When I run flash.bat it gives following error:
"Not found the Phoenix flash SMI communication area!"
http://i60.tinypic.com/25aovvt.jpg
And if I run PFLASH.exe, it says:
Read BIOS file and onboard....
(12-06-2014, 04:48 PM)BDMaster Wrote: Have You disabled SecureBoot and Set Legacy Bios USB into Setuputilty Bios Menu ?
Let me know
Regards
You have to flash from DOS environment so Booting from USB to do this
You have to Disable SecureBoot and Set Legacy Bios from USB !!!
Then Boot from USB and You'll go into DOS C:\ then run flash.bat !
An alternative is this Bios Mod, unpack this file and copy the "Modified"
folder contents into the USB stick and boot in DOS mode, then run lash.bat :
http://rghost.net/59469005
Run Flash.bat to update.
let me know
Regards
Use this tool and upload the result file (Universal Bios Backup) :
http://rghost.net/53128665
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM