Welcome
|
You have to register before you can post on our site.
|
|
[REQUEST] Lenovo IdeaPad U330, U430 & U530 (7CCNxxWW) Whitelist Removal
|
Posts: 27
Threads: 0
Joined: Feb 2014
Reputation:
0
I managed to install a BCM94352HMB in my Lenovo u430.
I didn't expect it to pass the whitelist, but it did. The card is a Azurewave product.
The device ids are: 14e4:43b1:106b:2154
I purchased on ebay for $30, free shipping.
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
(01-05-2015, 10:52 AM)lispad Wrote: Hi.
I have U430 Touch and bcm94352hmb, but can't use it, because of whitelist.
I have flashed last bios 62, managed to get WinUx30.bin and backup of dump with old flash utility.
Also i have pair of winbond 25q64 flash chips for testing and USBASP, flashed with alternative firmware for supporting SPI flashes. The only problem - i have no idea about how to patch rom file. I opened it with UEFI tool and found block with error messages about wifi card, but what next?...
Can anyone help with patching rom?
Here are WinUx30.bin with digital sign
https://yadi.sk/d/DTWiv-QVdo6gZ
and backup of newest 62 bios:
https://yadi.sk/d/6MF_TDRrdo6iP
Thanks for any replies.
Please friend,
use this tool run It as Admin and upload the result file here :
http://rghost.net/58219938
use this tool too and do the same :
http://rghost.net/53128665
let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 44
Threads: 0
Joined: Mar 2015
Reputation:
0
03-11-2015, 07:07 PM
(This post was last modified: 03-23-2015, 05:17 AM by ZabbensX.)
Hi again,
have another laptop to remove the wireless whitelist (actually upgrading my WLAN from n to ac and from ac 433 to ac 867).
It is n Lenovo U530.
I run the NEW_BACKUP_FPT script, the result is in the attachment.
I also tried the Universal bios backup, but this reports an unknown bios.
hope you can help again, thanks a lot, will donate on success
Greetings
ZabbensX
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
Here You go :
http://rghost.net/89NdqFQ57
Let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 44
Threads: 0
Joined: Mar 2015
Reputation:
0
Hi BDMaster,
thanks for your fast repley.
It did'nt work. Following Error occurs:
Flashing BIOS region backup.
Intel ® Flash Programming Tool. Version: 8.1.10.1286
Copyright © 2007 - 2012, Intel Corporation. All rights reserved.
Error 201: [FPT.exe] cannot be run on the current platform.
Please contact your vendor.
Press any key to continue...
Can you help here?
Thanks a lot
ZabbensX
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
Ok chenged FPT version, try this one !
Here You go :
http://rghost.net/6jcW22zww
Let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 44
Threads: 0
Joined: Mar 2015
Reputation:
0
Hi,
thanks again. It seems that i have no luck
Error 280: Failed to diable write protection for the BIOS space.
As far as i can see, there is no flashing possible without tools (SPI Programmer, test clip).
I ordered the tools, can i flash the rom file through the SPI Programmer directly,
or do i need an other version, or format?
Thanks so far and greetings
ZabbensX
Posts: 10,260
Threads: 3
Joined: Oct 2011
Reputation:
540
You haveto read all Eeprom Chip and we have to modify this file (Firmware) !
So don't corrupt your Eepom contains !
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 44
Threads: 0
Joined: Mar 2015
Reputation:
0
Hi,
perfect, when the utilities arrived, i will read the eeprom, send the file,
and then we will see
When i understood it right, the firmware i read is also a backup of my bios,
so when something went's wrong, i should be able to recover the bios through the firmware?
Greetings and thanks a lot
ZabbensX
|
Users browsing this thread: 31 Guest(s)
|