HP MCP61PM-HM (Nettle2) 5.27 With Unlocked Overclocking Options

[MrTangoWhisky]

*gg*
One was lost on the way to Singapore maybe it is a better way to buy one at your own sight...
There will be also a 512k-version soon without some recovery and audible stuff! Hope this will do it for testing!

Cheers from the nightly shadowed germany

Tobias

[TheWiz]

I leave Friday and land in Germany, temporarily, so I will wave to you in thanks for the gr8 work being done. Hopefully, you guys can pick up the slack on my trip

Chris

[MrTangoWhisky]

wait a moment, let google translate "slack" for me...

_________________________________________________________________________

OK, left empty space... When will you be back in NY?

_________________________________________________________________________

And WTF are you doing in germany? I gotta save all my work!!!

_________________________________________________________________________

Greetz from Germany

Tobias

[TheWiz]

Landing in germany for a European tour vienna, Salzberg, and Prague for classical orchestra music tour.

Slack (in my own words)= Picking up the work of others, or helping complete things that are normally done by a person throughout their absence.

You get it?

Chris

[banana19]

Landing in germany for a European tour vienna, Salzberg, and Prague for classical orchestra music tour.

Slack (in my own words)= Picking up the work of others, or helping complete things that are normally done by a person throughout their absence.

You get it?

Chris

wait! if your going to be in germany you can pick up the beer!

Nick

[MrTangoWhisky]

AND the bigger BIOS-Chip...














erm... it is really offtopic isn't it?

[talon4x4]

interesting...
its still using the original hardware key and coming up invalid. Lets do an experiment. disable networking, and reinstall under the new bios, and see if it can still check the key....

Nick

Everything is working fine now. I figured out that I have an issue with my IDE connection on the motherboard. Sometimes that drive is detected, other times it isn't. If I pull the cable and reseat it everything is fine and the drive works. Couple days later it isn't recognized again. Drive didn't have much on it so I just pulled it. This is what's causing the issues with my software key.

Thanks again for all the help!!

[alterr]

Hello i have a ECS mcp61pm-hm wich i flashed with the Nettle 2 bios XD

It all works fine i have my atlhon 3600+ wich orignally was @ 1900Mhz runing @ 2500Mhz and the memory is detected as an ddr2 800 but is originally a 667mhz XD well, im very happy bcoz of that but i've just readed that its possible to adjust also the voltajes, and memory timmings and i need to know how do i gain acces to that option.

And also want to know if its normal that when the bios starts for first time it takes around secs to detect all the sata's and the ide drives.

Thats all

Thanks for sharing ur knowledge to the world

Regards from mexico

[banana19]

Hello i have a ECS mcp61pm-hm wich i flashed with the Nettle 2 bios XD

It all works fine i have my atlhon 3600+ wich orignally was @ 1900Mhz runing @ 2500Mhz and the memory is detected as an ddr2 800 but is originally a 667mhz XD well, im very happy bcoz of that but i've just readed that its possible to adjust also the voltajes, and memory timmings and i need to know how do i gain acces to that option.

And also want to know if its normal that when the bios starts for first time it takes around secs to detect all the sata's and the ide drives.

Thats all

Thanks for sharing ur knowledge to the world

Regards from mexico

not sure which version you flashed. does it have the bios mod splash screen at start up? yes its normal to reinstal drivers at first boot.

Nick

[Abayarde]

Hi Guys, I followed this steps to the point to flash and saved the original .bin file. Afterrebooting, nothing works, fans are on but no HDD light or Power light and mobo wont post. Help please???