08-26-2015, 04:56 AM
Hey guys. i am Mohiuddin.
I am newbie in this BIOS modding sector.
My specs:
*i7 920
*xfx x58i play hard motherboard(detailed link)
*AMD 6850 GFX Card
I WANT:
Want badly the support of xeon x5650 on my motherboard. i am willing to even spend some money if i could.
Attached my BIOS and Donor BIOS(Asus SABERTOOTH x58- supporting x5650 fully). Both are AMI BIOS
Things i have already tried:
1. Replacing P6 Microcode module of My BIOS with the donor BIOS - using MMTool (BK MOD)
2. Updating microcode from the donor bios using MMTool
3. Manually adjusting different voltages to the recommended x5650 voltages
4. Manually setting the QPI jumper in the motherboard to 6.4GT (as x5650 is 6.4GT)
What happens with x5650 on my motherboard:
No matter what i try (as mentioned above), it acts almost the same.When i power up, the motherboard immediately restarts for one time. then it shows 88 on the ON_BOARD LCD , fan spins, cpu get warms but it does not POST.
But, when i manually set the jumper to QPI 6.4GT on motherboard, it keeps restarting again and again.
Now, i tried the x5650 on my friend's gigabyte x58 ud3r. it works flawlessly.
Detailed specification:
i7 920: CPUID- 1_06A5, 4core HT supported. Clock speed- 2.66ghz, Default cpu multi - 20x , QPI 4.8GT, Uncore multi default- 16x
Xeon x5650: CPUID- 1_06C2, 6core HT supported. Clock speed- 2.66ghz, Default cpu multi- 20x , QPI 6.4GT (If it helps you abit- as it is a server cpu,it supports dual qpi link), uncore dafault multi- 20x
Attached BIOS given below. guys please help. i spent alot of time and effort on this.
I am newbie in this BIOS modding sector.
My specs:
*i7 920
*xfx x58i play hard motherboard(detailed link)
*AMD 6850 GFX Card
I WANT:
Want badly the support of xeon x5650 on my motherboard. i am willing to even spend some money if i could.
Attached my BIOS and Donor BIOS(Asus SABERTOOTH x58- supporting x5650 fully). Both are AMI BIOS
Things i have already tried:
1. Replacing P6 Microcode module of My BIOS with the donor BIOS - using MMTool (BK MOD)
2. Updating microcode from the donor bios using MMTool
3. Manually adjusting different voltages to the recommended x5650 voltages
4. Manually setting the QPI jumper in the motherboard to 6.4GT (as x5650 is 6.4GT)
What happens with x5650 on my motherboard:
No matter what i try (as mentioned above), it acts almost the same.When i power up, the motherboard immediately restarts for one time. then it shows 88 on the ON_BOARD LCD , fan spins, cpu get warms but it does not POST.
But, when i manually set the jumper to QPI 6.4GT on motherboard, it keeps restarting again and again.
Now, i tried the x5650 on my friend's gigabyte x58 ud3r. it works flawlessly.
Detailed specification:
i7 920: CPUID- 1_06A5, 4core HT supported. Clock speed- 2.66ghz, Default cpu multi - 20x , QPI 4.8GT, Uncore multi default- 16x
Xeon x5650: CPUID- 1_06C2, 6core HT supported. Clock speed- 2.66ghz, Default cpu multi- 20x , QPI 6.4GT (If it helps you abit- as it is a server cpu,it supports dual qpi link), uncore dafault multi- 20x
Attached BIOS given below. guys please help. i spent alot of time and effort on this.