Ok mate,
as I promised You can use all these tools to unlock your AMI Aptio Bios :
http://rghost.net/84ykVMXch
You can use AfuWin to flah your Bios Mod :
AfuWin Save buttonAfuWin BIOS read operation
Then click on “Open” button and select the ROM with the name as your BIOS version.
DO NOT SELECT THE WRONG FILE, YOU COULD BRICK!
Then check “Do Not Check ROM ID” and “Restart After Programming” and press Flash.
Click on “Ok” when AfuWin asks if you want to continue and wait until the flash is done.
Your PC will reboot and you should see a new logo!
Press immediately F2 to enter BIOS options, go to “Exit” and select “Load Default Values” and then “Shutdown”.
Power on your laptop and check if all is working good!
If you have any trouble you can reflash the backup ROM you made before.
Here there are Tutorial and Guide to modify your Bios :
Here is a Tutorial to modify AMI Aptio Bios :
http://forums.mydigitallife.info/threads...MSR-unlock
Follow CodeRush Suggestions :
It's certanly not so easy for BIOSes with another menu setup, but the whole idea is the same.
I could also recommend trying AMIBCP to modify menu entries vilibility from "Default" to "USER",
if your menu setup is more complex then a setup above.
I have to flash my image on the administrator commandline using afuwinx64 bios_mod.rom /GAN . . .
Otherwise it gives me a security error (Thanks again CodeRush)
https://www.bios-mods.com/forum/Thread-G...EFI-Aptio4
Just use this version corrected of your Bios Backup (your is too long so bad size and get a Brick) :
http://rghost.net/8mrpvHJMq
Let me know
Regards
P.S. Donate to e for my work and time . . . look into my Signature