[Solved] Upgraded T7700 CPU on a Acer Extensa 5630EZ

[SimoSi84]

Hi guys, I succesfully upgraded a T7700 on my laptop above. It works perfectly but, after the bios screen, it shows me the list of the installed hardware and at the end "FB No microcode update loaded for alternate processor"; I have to press F1 and system starts properly. Can someone help me?

Thanks in advance
Simone

P.S.

Follow my bios and cpu specs.





S-Spec number: SLAF7
Stepping: G0
CPU ID: 06FB

[SimoSi84]

Please help me!!

[BDMaster]

Hi guys, I succesfully upgraded a T7700 on my laptop above. It works perfectly but, after the bios screen, it shows me the list of the installed hardware and at the end "FB No microcode update loaded for alternate processor"; I have to press F1 and system starts properly. Can someone help me?

Thanks in advance
Simone

P.S.

Follow my bios and cpu specs.

S-Spec number: SLAF7
Stepping: G0
CPU ID: 06FB

Hi friend,
I don't know if this CPU is full supported into your Bios, but It seems that
Bios not contains the processor's supported instruction set which are
alternatively introduced by Microcode !
Look here Donovan Guide :

http://donovan6000.blogspot.it/2013/06/i...codes.html

Here latest microcode file :

https://downloadcenter.intel.com/Detail_...ldID=24290&lang=eng

Here WinRAR :

http://www.rarlab.com/download.htm

Microcode Extracting Tool :

http://www.elhvb.com/mboards/wimsbios/microdecode.rar

Regards

[SimoSi84]

Hi guys, I succesfully upgraded a T7700 on my laptop above. It works perfectly but, after the bios screen, it shows me the list of the installed hardware and at the end "FB No microcode update loaded for alternate processor"; I have to press F1 and system starts properly. Can someone help me?

Thanks in advance
Simone

P.S.

Follow my bios and cpu specs.

S-Spec number: SLAF7
Stepping: G0
CPU ID: 06FB

Hi friend,
I don't know if this CPU is full supported into your Bios, but It seems that
Bios not contains the processor's supported instruction set which are
alternatively introduced by Microcode !
Look here Donovan Guide :

http://donovan6000.blogspot.it/2013/06/i...codes.html

Here latest microcode file :

https://downloadcenter.intel.com/Detail_...ldID=24290&lang=eng

Here WinRAR :

http://www.rarlab.com/download.htm

Microcode Extracting Tool :

http://www.elhvb.com/mboards/wimsbios/microdecode.rar

Regards

Thank you so much for your response, I am very appreciated it; is there a way to see/check the exact info for my T7700 into those files ?

[genius239]

Hi guys, I succesfully upgraded a T7700 on my laptop above. It works perfectly but, after the bios screen, it shows me the list of the installed hardware and at the end "FB No microcode update loaded for alternate processor"; I have to press F1 and system starts properly. Can someone help me?

Thanks in advance
Simone

P.S.

Follow my bios and cpu specs.





S-Spec number: SLAF7
Stepping: G0
CPU ID: 06FB

Hello friend~~

Uncompress  BIOS_Acer_1.36_A_A.zip,we can found that,there are three type of environment to flash bios.(dos and x86 and x64)

I have help you out to injected micro code that you need .
Here is bios modification link:
https://mega.co.nz/#!igZDEK4T!xBm10hzwTL...tt3v3IzSY4

Uncompress this file and copy them to dos folder then to replace original bios file(HMA136.ROM and HMA136.WPH)

You need to make a usb dos stick to going to dos environment, then execute bios.bat to start update bios.

Remember to give me a feedback,i wanna to know whether it is success and normal  with your laptop.


Good luck to you.



Feng

[SimoSi84]

Hello friend~~

Uncompress  BIOS_Acer_1.36_A_A.zip,we can found that,there are three type of environment to flash bios.(dos and x86 and x64)

I have help you out to injected micro code that you need .
Here is bios modification link:
https://mega.co.nz/#!igZDEK4T!xBm10hzwTL...tt3v3IzSY4

Uncompress this file and copy them to dos folder then to replace original bios file(HMA136.ROM and HMA136.WPH)

You need to make a usb dos stick to going to dos environment, then execute bios.bat to start update bios.

Remember to give me a feedback,i wanna to know whether it is success and normal  with your laptop.


Good luck to you.


Feng

Dear Feng,
I don't know how to thank you for helping me so quickly! I tried your bios few minutes ago and It worked perfectly in my system! It's one of the best Christmas gift that I've ever received!

[genius239]

Hello friend~~

Uncompress  BIOS_Acer_1.36_A_A.zip,we can found that,there are three type of environment to flash bios.(dos and x86 and x64)

I have help you out to injected micro code that you need .
Here is bios modification link:
https://mega.co.nz/#!igZDEK4T!xBm10hzwTL...tt3v3IzSY4

Uncompress this file and copy them to dos folder then to replace original bios file(HMA136.ROM and HMA136.WPH)

You need to make a usb dos stick to going to dos environment, then execute bios.bat to start update bios.

Remember to give me a feedback,i wanna to know whether it is success and normal  with your laptop.


Good luck to you.


Feng

Dear Feng,
I don't know how to thank you for helping me so quickly! I tried your bios few minutes ago and It worked perfectly in my system! It's one of the best Christmas gift that I've ever received!

It's great!!

I'm glad that you got success!!