10-23-2015, 11:25 AM
(This post was last modified: 10-23-2015, 01:51 PM by the_patchelor.)
I crashed my EFI Bios of my B113 (Motherboard, Q1VCZ-LA 8941P, HM77, i3-2377M, without Windows)
Long story, I was only able to update until 1.09, I tried to get 2.22 working somehow. (for UEFI Boot, win10)
I found a file from another user and sucessfully flashed it but it had a bios password lock. (stupid idea just to use this file...)
https://www.bios-mods.com/forum/Thread-U...-17?page=4
http://rghost.net/6rcRsLpWg
Ok, tried to update same official version, 2.22 with Acer/InsydeFlash tool in Windows. This crashed at 48%, Display went corrupted and finally off. After 15 minutes I rebooted, no boot, Power LED is on, Fan starts, and after a while it starts again.
Normal recovery procedere (Fn+ESC, bios.fd) doesn't work anymore, 1.09, 2.21, 2.22.
So, any ideas? I just soldered 8 wires to the U17 winbond w25Q32BVSIGg chip and tried some hotflashing with an Asrock H77m-itx and the file above. Not really successfull. still no boot.
My next idea is ordering a flashed bios chip or buy a Bios programmer and try...
Next to U17 is U18 located: winbond 25Q80BVSIG, what is this about?
Does someone has a full Bios file and some Dos flasher? (Flash-it?!?)
original bios file:
1.09
http://global-download.acer.com/GDFiles/...ER&SC=PA_6
2.22
http://global-download.acer.com/GDFiles/...ER&SC=PA_6
I think LAN MAC address is already gone, may I can write a different address from an old LAN adapter card.
I hope I can get it somehow back to life. Btw: I'm working in IS, and first time I forgot to make a backup... I know, shi* happens...
EDIT:
found "flashrom" tool, my "Hotflash" H77 Board is not supported, ME is locked.
Now installed a Raspberry PI2 and now playing around with SPI programming. I guess this can be cheaper than buying a dedicated programmer.
Now I need a full Bios dump. Or any other ideas?
Long story, I was only able to update until 1.09, I tried to get 2.22 working somehow. (for UEFI Boot, win10)
I found a file from another user and sucessfully flashed it but it had a bios password lock. (stupid idea just to use this file...)
https://www.bios-mods.com/forum/Thread-U...-17?page=4
http://rghost.net/6rcRsLpWg
Ok, tried to update same official version, 2.22 with Acer/InsydeFlash tool in Windows. This crashed at 48%, Display went corrupted and finally off. After 15 minutes I rebooted, no boot, Power LED is on, Fan starts, and after a while it starts again.
Normal recovery procedere (Fn+ESC, bios.fd) doesn't work anymore, 1.09, 2.21, 2.22.
So, any ideas? I just soldered 8 wires to the U17 winbond w25Q32BVSIGg chip and tried some hotflashing with an Asrock H77m-itx and the file above. Not really successfull. still no boot.
My next idea is ordering a flashed bios chip or buy a Bios programmer and try...
Next to U17 is U18 located: winbond 25Q80BVSIG, what is this about?
Does someone has a full Bios file and some Dos flasher? (Flash-it?!?)
original bios file:
1.09
http://global-download.acer.com/GDFiles/...ER&SC=PA_6
2.22
http://global-download.acer.com/GDFiles/...ER&SC=PA_6
I think LAN MAC address is already gone, may I can write a different address from an old LAN adapter card.
I hope I can get it somehow back to life. Btw: I'm working in IS, and first time I forgot to make a backup... I know, shi* happens...
EDIT:
found "flashrom" tool, my "Hotflash" H77 Board is not supported, ME is locked.
Now installed a Raspberry PI2 and now playing around with SPI programming. I guess this can be cheaper than buying a dedicated programmer.
Now I need a full Bios dump. Or any other ideas?