Hello:
I have an old HP Touchsmart 320-1050
CPU Type QuadCore AMD A6-3600, 2100 MHz (21 x 100)
Motherboard Name Pegatron 2ACB
Motherboard Chipset AMD A55, AMD K12
System Memory 7666 MB (DDR3 SDRAM)
DIMM1: Ramaxel RMT3160ED58E9W1600 4 GB DDR3-1600 DDR3 SDRAM (11-11-11-28 @ 800 MHz) (10-10-10-27 @ 761 MHz) (9-9-9-24 @ 685 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-19 @ 533 MHz) (6-6-6-16 @ 457 MHz) (5-5-5-14 @ 380 MHz)
DIMM3: Elpida EBJ40UG8EFU0-GN-F 4 GB DDR3-1600 DDR3 SDRAM (11-11-11-28 @ 800 MHz) (10-10-10-27 @ 761 MHz) (9-9-9-24 @ 685 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-19 @ 533 MHz) (6-6-6-16 @ 457 MHz) (5-5-5-14 @ 380 MHz)
BIOS Type AMI (04/12/2012)
BIOS Vendor AMI
BIOS Version 7.15
Specs: https://support.hp.com/us-en/document/c03024967
BIOS link: https://support.hp.com/ca-en/drivers/sel...p-118433-1
I read somewhere A8 3850 is supported, so i bought a 3850 chip from ebay. I am using a dell 240w power, the 100w TDP should not be a problem. However, when i plug it in, i got this "unsupported cpu error". Can anyone help to modify the bios so the new chip is supported, many thanks.
I have an old HP Touchsmart 320-1050
CPU Type QuadCore AMD A6-3600, 2100 MHz (21 x 100)
Motherboard Name Pegatron 2ACB
Motherboard Chipset AMD A55, AMD K12
System Memory 7666 MB (DDR3 SDRAM)
DIMM1: Ramaxel RMT3160ED58E9W1600 4 GB DDR3-1600 DDR3 SDRAM (11-11-11-28 @ 800 MHz) (10-10-10-27 @ 761 MHz) (9-9-9-24 @ 685 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-19 @ 533 MHz) (6-6-6-16 @ 457 MHz) (5-5-5-14 @ 380 MHz)
DIMM3: Elpida EBJ40UG8EFU0-GN-F 4 GB DDR3-1600 DDR3 SDRAM (11-11-11-28 @ 800 MHz) (10-10-10-27 @ 761 MHz) (9-9-9-24 @ 685 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-19 @ 533 MHz) (6-6-6-16 @ 457 MHz) (5-5-5-14 @ 380 MHz)
BIOS Type AMI (04/12/2012)
BIOS Vendor AMI
BIOS Version 7.15
Specs: https://support.hp.com/us-en/document/c03024967
BIOS link: https://support.hp.com/ca-en/drivers/sel...p-118433-1
I read somewhere A8 3850 is supported, so i bought a 3850 chip from ebay. I am using a dell 240w power, the 100w TDP should not be a problem. However, when i plug it in, i got this "unsupported cpu error". Can anyone help to modify the bios so the new chip is supported, many thanks.