05-16-2022, 11:57 AM
I want to install Hackintosh on my laptop but my bios setting doesn't let me. I have currently this bios but I think this isn't working to boot BigSur/Monterey but Catalina. And I also want to acces to cpu overclocking settings I gotta increase the throttling starts degreece. All information and links are in bottom, thanks in advance. Excalibur G770 (thunderobot g7000s/Thunderobot 911 air)
CPU: i5 9300h
GPU: gtx 1050 3gb
RAM: 8gb single slot 2666mhz
Bios id: NLAH
Bios Version: CP/QP/TP, mine is BIOS Version/Date Insyde QP211, 25.10.2019 but others work too.
Mainboard: DANLAGMBAB0 rev:B
BaseBoard Manufacturer: Quanta
SMBIOS Version: 3.0
Embedded Controller Version: 1.71
BIOS Mode: UEFI
The setting i gotta acces for hackintosh are;
(Disable)
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
CSM
Thunderbolt
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(It should definitely be turned off. If you can't find this setting, turn on AppleXcpmCfgLock under config -> Kernel -> Quirks. Your system will not boot when CFG-Lock is on)
(Enable)
VT-x
VT-d
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode
DVMT Pre-Allocated(iGPU Memory): 64MB
SATA Mode: AHCI
In forum I have to do these changes in my bios but there aren't these options in my current bios.
Current (modded but not working bios: https://www.sendspace.com/file/u0amfv)
With stock bios: https://www.sendspace.com/file/jxeg5e
All Info About Notebook: https://www.sendspace.com/file/gdcrpt
CPU: i5 9300h
GPU: gtx 1050 3gb
RAM: 8gb single slot 2666mhz
Bios id: NLAH
Bios Version: CP/QP/TP, mine is BIOS Version/Date Insyde QP211, 25.10.2019 but others work too.
Mainboard: DANLAGMBAB0 rev:B
BaseBoard Manufacturer: Quanta
SMBIOS Version: 3.0
Embedded Controller Version: 1.71
BIOS Mode: UEFI
The setting i gotta acces for hackintosh are;
(Disable)
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
CSM
Thunderbolt
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(It should definitely be turned off. If you can't find this setting, turn on AppleXcpmCfgLock under config -> Kernel -> Quirks. Your system will not boot when CFG-Lock is on)
(Enable)
VT-x
VT-d
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode
DVMT Pre-Allocated(iGPU Memory): 64MB
SATA Mode: AHCI
In forum I have to do these changes in my bios but there aren't these options in my current bios.
Current (modded but not working bios: https://www.sendspace.com/file/u0amfv)
With stock bios: https://www.sendspace.com/file/jxeg5e
All Info About Notebook: https://www.sendspace.com/file/gdcrpt