[REQUEST] Ivy Bridge support on Dell Vostro 260/Inspiron 620

[DeathBringer]

You need real dump of BIOS from Dell OptiPlex 3010.

[DeathBringer]

Official exe-firmware doesn't have full dump for flashing. It is used for update only.
You need to read BIOS on real OptiPlex 3010 motherboard or find real dump in Internet.

[DeathBringer]

If you can't find a real BIOS dump, then you can buy it.

[GATORGT]

it's MXIC MX 25L3206E M2I-12G.
This is 4MB BIOS chip, but compatible BIOS for your motherboard (with Ivy Bridge support) requires 8MB BIOS chip.

Hi i got an DELL INSPIRON 620 and i would like to know if there is any way to use my i5 3470.The mobo and cpu info , bios chip are in the  drive link.Greetings and thanks.
Link:https://drive.google.com/drive/folders/1GegxNLoHC4OwFEUDzAiIuUyu60wrG-ft?usp=sharing

[DeathBringer]

bios chip are in the  drive link.

This is 4MB BIOS chip.

[GATORGT]

bios chip are in the  drive link.

This is 4MB BIOS chip.

Thanks for answering..but there isn,t idk any way to insert the microcodes or install an intel MM or something?..I also got an H61 Asus motherboard that is ded can i transfer the chip from the ASUS motherboard to the DELL one?

[DeathBringer]

Adding microcode will not add support for Ivy Bridge.

[FeeJayHere]

Hello,
I'm really curious if it's possible to add support for IvyBride to this older dell motherboard.
mobo: MIH61R
32mbits eeprom
H61 chipset
 I have i3-2120 and i5-3330s for testing. I have ch341a programmer and knowledge of programming/dumping, so there is no problem with that.
Resources I've found:
Few years ago people tried to add this support, unfortunately they failed: https://www.win-raid.com/t3733f16-Reques...pport.html
Dell Inspiron One 2020 have the same chipset and have IvyBridge support
Someone in the link soldered larger eeprom and flashed it with Optiplex 3010 bios, it worked but not without problems.

In the attachment is my dumped bios and original bios from Dell website
Thanks for help in advance!

EDIT:
couldn't find this tread, i see my thread was moved here.
I will flash 8mb chip with optiplex bios, but is it possible to add suport to the rest of sata ports? only two are working with optiplex bios