Gigabyte GA-880GA-UD3H (rev. 2.0) SLIC 2.1

[prostorua]

Hello, hope for your help
Award SLIC Mod v1.47 utility ends with the following error message "Unable to perform an SSV3 mod as there is no EPA module"

motherboard: Gigabyte GA-880GA-UD3H (rev. 2.0)

link to BIOS F7: http://download.gigabyte.eu/FileList/BIO...2.x_f7.exe

link to motherboard page: http://www.gigabyte.com/products/product-page.aspx?pid=3425&dl=1#bios

thank you

regards,
prostorua

[f3bandit]

Hello, hope for your help
Award SLIC Mod v1.47 utility ends with the following error message "Unable to perform an SSV3 mod as there is no EPA module"

motherboard: Gigabyte GA-880GA-UD3H (rev. 2.0)

link to BIOS F7: http://download.gigabyte.eu/FileList/BIO...2.x_f7.exe

link to motherboard page: http://www.gigabyte.com/products/product-page.aspx?pid=3425&dl=1#bios

thank you

regards,
prostorua

Here you go enjoy SLIC 2.1 and SLP 2.0 Modded
Enjoy!

[attachment=1609]

[DMAN999]

Award SLIC Mod v1.47 utility ends with the following error message "Unable to perform an SSV3 mod as there is no EPA module"

Leave SSV3 Method ticked and Go into Advanced Options and tick SSV3 -> Force Adjustment -> ACPITBL at End
OR try the new AwardTool version 1.50 and it should do that automatically.

[prostorua]

Here you go enjoy SLIC 2.1 and SLP 2.0 Modded
Enjoy!

Thank you.

I had flashed modded bios with @BIOS Gigabyte utility and got "OK" message.
After reboot I got black screen and no sounds or "signs of life".

I've just got the mobo back from Gigabyte service and will try to flash it again today when I get home.

1. Is there something you would like to change in the modded bios you've provided me with?
2. What would you recommend: flashing from DOS with FLASHSPI.EXE utility or flashing with QFLASH from POST screen?

regards,
prostorua

---

Leave SSV3 Method ticked and Go into Advanced Options and tick SSV3 -> Force Adjustment -> ACPITBL at End
OR try the new AwardTool version 1.50 and it should do that automatically.

Could you please provide me with 1.50 version. Can't find it. Thank you

[DMAN999]

awardtool150.zip
http://www.sendspace.com/file/79bwfr

Gigabyte_GA-880GA-UD3H_(Rev._2.0)_F7_Gigabyte_SLIC_2.1_SSV3.rar
http://www.sendspace.com/file/gvc7ca

Flash ALL Gigabyte Mods From DOS with FlashSPI, NEVER Use @BIOS !!!

[prostorua]

Gigabyte_GA-880GA-UD3H_(Rev._2.0)_F7_Gigabyte_SLIC_2.1_SSV3.rar
http://www.sendspace.com/file/gvc7ca

Confirmed working

Thank you!

[DMAN999]

^ Thanks for the Feedback.

[khorngor]

Is it possible to unlock Crossfire support through a BIOS mod on this motherboard?

Read about bios mods that enabled it, so i was wondering if it was possible considering it got the connectivity for 2 graphics cards. (yes i know second one at x4 mode but it means little to no diffrence ^^ )

http://www.gigabyte.com/products/product...=3425#bios

Newest bios there.

[slarco]

Is it possible to unlock Crossfire support through a BIOS mod on this motherboard?

Read about bios mods that enabled it, so i was wondering if it was possible considering it got the connectivity for 2 graphics cards. (yes i know second one at x4 mode but it means little to no diffrence ^^ )

http://www.gigabyte.com/products/product...=3425#bios

Newest bios there.

Sorry to bring this back up but I'm new here.

What difference has this modified bios with the f7?

[DMAN999]

^ It has SLIC 2.1 info added for Windows7 Activation.