(12-04-2018, 06:51 AM)Lugburz Wrote: Hello !
I spent some time trying to make a EGPU working with M.2 port from WLAN card but all my attenpts failed with no boot or black screen.
My research let me think there is a whitelist for this port so I kindly ask for a whitelist removal.
Checked the bios with andy tools, does not appear to be RSA signed
Didn't find the bios in the repository of available BIOSes.
Here are the specs :
ASUS TUF GAMING FX504GD
link to the latest bios from asus website :
https://dlcdnets.asus.com/pub/ASUS/Gamin...DAS312.zip
PCI ID of original WLAN Card (intel 9560NGW) :
PCI\VEN_8086&DEV_A370&SUBSYS_00348086&REV_10
PCI\VEN_8086&DEV_A370&SUBSYS_00348086
PCI\VEN_8086&DEV_A370&CC_028000
PCI\VEN_8086&DEV_A370&CC_0280
Thanks ! 
Hi Lugburz
I have facing out the same symptoms whether i try to use EXP GDC board with NGFF/M.2 A/E cable with WiFi slot of my HP laptop. I tried all attempts also using Setup1.35 (nando...), hotplug and so on... but I obtained only black screen and freezing .
I hope that removing whitelist wifi from bios will be the right way ... ;
Asap, can you say what the results to me after that you apply the modded version?
Thanks a lot of
Giovanni