edit : im a stup1d id10t
just enable hybrid graphics in bios
may this help someone else
the last question, which i will test out soon, what would happen if i was to reset the bios and it set the hybrid graphics to off again?
sum keywords
hp zbook 17 g2 mxm gpu graphics bios vbios mod unlock rtx gtx geforce radeon amd intel i7 hd quadro update
Hello there
So i found this forum searching for a way to "fix" my "new" laptop
Last year i bought a msi gt60 which i upgraded with a m3000m (maxwell) then a quadro rtx 3000 (=rtx 2060m) that i got for 100€ off ebay
But the 15 inches display is too small and i don't like either the keyboard or trackpad
That's why i bought the zbook
It had a quadro k3100m in it, working fine but you know kepler 2024 etc
So i installed the quadro RTX, but all it does is spin the fan for a minute, then shut down the computer, no display no beep no backlight
Reinstalled the kepler, booted right away
Tried with the m3000m, same behavior as the rtx
Laptop bios is up to date already
It shouldn't be tdp related as the zbook was available with 100w gpu (mine is 80), as well as the maxwell 1 k2200m for architecture
The m3000m is a "reference" design, looks almost identical to the kepler, both with nvidia logo on the green pcb
The RTX has a black pcb and was bought "used" from pny france
In my msi, both card booted as is, but needed to use nvcleanstall from techpowerup to install drivers, but it worked as intended
You can find the hp bios here https://ftp.hp.com/pub/softpaq/sp103501-...103523.exe
Thanks for help and suggestions
just enable hybrid graphics in bios
may this help someone else
the last question, which i will test out soon, what would happen if i was to reset the bios and it set the hybrid graphics to off again?
sum keywords
hp zbook 17 g2 mxm gpu graphics bios vbios mod unlock rtx gtx geforce radeon amd intel i7 hd quadro update
Hello there
So i found this forum searching for a way to "fix" my "new" laptop
Last year i bought a msi gt60 which i upgraded with a m3000m (maxwell) then a quadro rtx 3000 (=rtx 2060m) that i got for 100€ off ebay
But the 15 inches display is too small and i don't like either the keyboard or trackpad
That's why i bought the zbook
It had a quadro k3100m in it, working fine but you know kepler 2024 etc
So i installed the quadro RTX, but all it does is spin the fan for a minute, then shut down the computer, no display no beep no backlight
Reinstalled the kepler, booted right away
Tried with the m3000m, same behavior as the rtx
Laptop bios is up to date already
It shouldn't be tdp related as the zbook was available with 100w gpu (mine is 80), as well as the maxwell 1 k2200m for architecture
The m3000m is a "reference" design, looks almost identical to the kepler, both with nvidia logo on the green pcb
The RTX has a black pcb and was bought "used" from pny france
In my msi, both card booted as is, but needed to use nvcleanstall from techpowerup to install drivers, but it worked as intended
You can find the hp bios here https://ftp.hp.com/pub/softpaq/sp103501-...103523.exe
Thanks for help and suggestions